Sunking Solar Light Home60 Phone charging and Light

Power LEDs with 300 lumens total flux (100 lumens per lamp)

Three light modes controlled by wall-mounted switches: Turbo (100 lumens); Normal (50 lumens); Low (20 lumens)

5 year lifetime, 6000 mAh Lithium Ferro-Phosphate (LFP) battery

6 W detachable, polycrystalline panel with aluminum frame and 5 meter wire

Up to 24 hours of run time on a day’s charge

2V power output designed to power 12V DC appliances

5.5V USB power output designed to power any standard USB device

Includes USB cable and common phone adapters

LED charging indicator displays charging effectiveness on a scale of 1 to 5 to help optimize panel placement

LED battery indicator displays battery power remaining

Active battery management automatically switches to low power when battery is running low, giving user 5 hours of additional light

CM/R-50 Xantrex Remote Display for Solar Charge Controller

55,272.00
Remote Display for C35,C40,C60,15mcable CM/R-50 Xantrex Remote Display For Solar Charge Controller Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart

Xantrex Solar Charge Controller PMW C35

113,620.00
C60=49,507.84 With display Meter=N75,835.84 C40=45,491.19 with display Meter=N71,819.19 C35=34,044.49 With display Meter=N60,372 Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. C12-12V C35-12V/24V (55 VDC) C40-12V/24V/48V (125 VDC) C60-12V/24V (55 VDC) with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart

MidNite Solar MNDC250

The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure. Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker. Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more

Epsolar Landstar LS2024BP

Product features 1.Increases PV Array Output by up to 30% 2.Advanced Continuous Maximum Power Point Tracking 3.Full Power Output in Ambient Temperatures up to 104°F (40°C) 4.Battery Voltages from 12 VDC to 60 VDC 5.Programmable Auxiliary Control Output 6.Built-in 128 days of Data Logging 7.Fully Network Integrated and Programmable support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more

MC4 Solar Connector

1,550.00
MC4 Solar Connector Male and Female (pair) PV Connector Solar Connector Electrical Connector for solar cable , 4mm diameter , rated at 1500V. The MC4 system consists of a plug and socket design. Black color
Add to cart

Select at least 2 products
to compare