Main
range Vivace
product or component type Switch
device short name KB31bpb
device application Control
device presentation Complete mechanism
Complementary
switch function Bell
actuator Rocker
number of gangs 1 gang
colour tint White
material Polycarbonate: grid plate
Polycarbonate: surround
Nylon: base
projecting depth 8 mm
device mounting Flush
mounting support Wall mounted
fixing mode By screw M3.5
fixing center 60.3 mm
embedding depth 35 mm
rated current 10 A at 250 V AC, fluorescent
[Ue] rated operational voltage 250 V AC
network frequency 50 Hz
contacts material Brass and phosphor bronze
connections – terminals Pillar terminal
terminal identifier L2
L1
tightening torque 0.4 N.m
clamping connection capacity <= 2.5 mm²
width 86 mm
height 86 mm
Environment
standards SS 227
IEC 60669-1
MS IEC 60669-1
ambient air temperature for operation -5…40 °C
relative humidity 0…95 %
environmental characteristic Indoor use
Packing Units
Package 1 Weight 82.500 g
Package 1 Height 1.000 cm
Package 1 width 1.000 cm
Package 1 Length 1.000 cm
Offer Sustainability
REACh Regulation REACh Declaration
EU RoHS Directive
Compliant

EU RoHS Declaration

Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration

Product out of China RoHS scope. Substance declaration for your information
Contractual warranty
Warranty 18 months

Himel AC Breaker 16A 1P

2,020.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN1C6 Ampere Rating: 16 Number of Poles: 1 Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart

Schneider Conext SCP: Solar System Control Panel

359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
Weight 0.9 kg
Dimensions 9.0 × 11.0 × 3.0 in
    The XW+/SW SCP is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System. Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor • Multiple SCP can be used on the same Xanbus network • Compatible with Conext ComBox
Add to cart

Schneider Flush Switch 16AX 2ways 1gang KB31

2,425.00
Main range Vivace product or component type Switch device short name KB31 device presentation Complete mechanism Complementary switch function 2 way actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate: grid plate...
Add to cart

MidNite Solar MNDC250

The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure. Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker. Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more

Select at least 2 products
to compare