Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5″ NPT
Weight: 18 pounds
Dimensions: 32″ length and 3.9″ wide
Grundfos SQ-Flex solar pumps will pump water up to 600 foot total head, and can pump up to 85 gallons per minute for shallow wells, depending on model. The helical rotor pumps are what we recommend if you have any dirt, sand, sediment, or high mineral water from your well. The 3 SQF, 6 SQF, and the 11SQF are helical rotor type pumps. All others are centrifugal. All SQF pumps are 17 to 23 pounds in actual weight.
Features and Benefits:
Renewable energy supply: solar panels or wind turbines
Built-in electronics, easy installation
Reliable water supply
Low operating costs
Dry-running protection
Built-in motor protection
High Efficiency
Maximum Power Point Tracking (MPPT)
Wide voltage range
Built-in sand shield
Two-year warranty
Homaya Pro 3KVA
₦619,954.04
Homaya Pro is a solar-hybrid solution specifically designed for locations having unreliable or no access to electricity. It provides customisable, reliable, and renewable energy access for homes, fuel stations, small offices, healthcare centres, educational institutions, and telecom towers. Homaya Pro is powered from solar with an inbuilt MPPT controller, compatible with grid charging, and supports Lead acid or LFP battery technology.
Add to cart
Homaya Pro 4KVA
₦856,600.88
Homaya Pro is a solar-hybrid solution specifically designed for locations having unreliable or no access to electricity. It provides customisable, reliable, and renewable energy access for homes, fuel stations, small offices, healthcare centres, educational institutions, and telecom towers. Homaya Pro is powered from solar with an inbuilt MPPT controller, compatible with grid charging, and supports Lead acid or LFP battery technology.
Add to cart
MULTIPLUS II 48/3000/35-32 230v GX PMP485021010 Victron Energy
MULTIPLUS II 24/3000/70 32VICTRON 230V MULTIPLUS II PURE SINE WAVE INVERTER / CHARGER • 24V 3000VA INVERTER 35A BATTERY CHARGER WITH 32A AUTOMATIC TRANSFER SWITCH
OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 - 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 - 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
FM100_specsheet
Add to cart
Rolls AGM Battery 12V 220ah @100HR
₦305,756.00
Rolls 220ah 12V agm battery , made by Rolls battery engineering , Canada
Manufactured in China factory
Add to cart
Related products
SmartSolar MPPT 150/70-Tr VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
MC4 Branch Solar Connector 3 to 1
₦6,540.00
MC4 T 3 in 1 Solar Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating: 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Sharp solar Panel 445W nu-jd445
₦227,930.00
Maximum power Pmax 445 Wp Pmax 445wp
Open-circuit voltage Voc 49.04V
Short-circuit current Isc 11.55A
Voltage at point of maximum power Vmpp 41.32
Current at point of maximum power Impp 10.77
Module efficiency nm 20.1%
Datasheet 2102_NUJD_445_HC-Mono_Datasheet_10Y_EN
Add to cart
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
Schneider Conext Combox Monitoring System
₦283,676.00
Schneider Conext Combox Monitoring System 865-1058
Advanced diagnostics for solar and battery systems
The Conext™ ComBox is a powerful communications and monitoring device for installers and operators of Conext solar systems. It features an integrated web server, enabling graphical displays of system daily, monthly and lifetime energy data to be viewed using a simple web browser or Android™ tablet device.
• Monitor solar system harvest and yield anytime, anywhere
• Measure and compare energy performance over varying timelines
• Receive email alerts and reduce system downtime
Add to cart
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Reviews
There are no reviews yet.