solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as part of the structure of the building (called BIPV).
2.5m Rail , will mount 2 solar panel .
Contains Rail, Mid Clamp, End Clamp, L-Foot
Pylontech UP5000
The Pylontech UP5000 lithium battery is a mid-range 48V battery that is ideal for daily cycling applications with a lifetime of over 4,500 cycles at a 95% depth of discharge. This battery also suits larger domestic applications as you can parallel up to 16 units for up to 72.96kWh of high-performance energy storage.
This reliable solar storage solution comes with a 7-year warranty. However, its ultra-reliable performance and superior low failure rate mean it should last over 10 years.
Key Features:
Read more
- Modular design for ease of expansion
- Higher usable capacity resulting in fewer battery modules installed
- Usable capacity up to 4,560Wh
- Parallel Capability of up to 16 units
- Allows for large installation of up to 72.96kWh with no LV Hub
- Intelligent BMS protecting battery cells
- 95% DoD with more usable capacity
- RS485 and CAN compatible
SmartSolar MPPT 150/60-Tr
Victron BlueSolar MPPT 150/60-Tr Charge Controller - 60 Amps / 150 Volts 
Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Add to cart
Sigenergy 150kw Inverter Energy Storage
₦520,000,000.00
System specifications
*Sigen Energy Controller 10KW TP
*Sigen Battery with LED
Sigen Energy Gateway
Sigen Datalogger
No.of MPP. trackers 2 / 3/ 4
No.of PV strings per MPPT 1
Max.input current per MPPT 16 A
AC Output (on-grid)
Nominal output voltage 380 / 400 V
Efficiency
Max. efficiency 98.1%/98.2%/98.3%
General
Cooling Natural convection
Ingress protection rating IP66
Add to cart
BREAKER 250A 160VDC
₦642,000.00
160 VDC. Panel mount for XW+ PDP or SW DC PDP.
Same as Midnite 250A panel mount breaker ( without enclosure0
Add to cart
Related products
SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
3KW Solar System
8 pcs of 350W monocrystalline panels,
2 sets of foreign mounting rails and accessories,
combined box and
40metres of 6mm flex cable.
Installation and logistics not inclusive
Read more
XW-CONDUIT BOX Schneider Conext
₦258,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Reviews
There are no reviews yet.