Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as part of the structure of the building (called BIPV).
2.5m Rail , will mount 2 solar panel .
Contains Rail, Mid Clamp, End Clamp, L-Foot
Out of stock
Outback SPCIIM-5000-48 Solar O Grid-Hybrid Inverter
Models: SPCIIM-5000-48 • Pure sine wave inverter • Output Power Factor up to 1 • Output Power up to 5000 Watts • Maximum 9 units in parallel / three phase, configurable • Built-in MPPT up...
Read more
Beaver Mini Battery Switch/Disconnect On-Off 12-48V
₦29,095.00
Battery Switch or battery Disconnect, battery isolator suitable for most residential inverter installation where safety is required.
Add to cart
Schneider Vivace Switched Socket with Neon 15A 1way 1gang KB15_15N
₦5,327.00
Main range Vivace product or component type Switched socket device short name KB15 device presentation Complete product Complementary pilot light Red neon indicator outlet poles configuration 1P + E number of gangs 1 gang Colour...
Add to cart
Lithium Battery 200A (AKKUTECH)
Nominal Voltage-51.2V
charge mode 0.2c to 56V
Charge Current -40A
Max Charge Current=65A
Minimum discharge Voltage-44V
Weight=104kg
Dimension -520mmX442mmX223mm
Design Life-10 years
Cycle -4,000 80% DOD
AT-SPEC-LiFePO4 Battery 51.2V-10.24kWh-L
Read more
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Related products
FM80 Solar Charge Controller Outback System
₦502,425.00
FM80 Solar Charge Controler
12/24/36/48/60V @ 80A MPPT
DC Voltage: 12 / 24 / 48 / 60 V
Array Max Power: 1000 / 2000 / 4000 / 5000 W
Max. Open Circuit Voltage: 150 Voc
Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Add to cart
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
