solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as part of the structure of the building (called BIPV).
2.5m Rail , will mount 2 solar panel .
Contains Rail, Mid Clamp, End Clamp, L-Foot
Interface MK3-USB (VE.BUS to USB)
₦31,000.00
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Add to cart
Beaver Mini Battery Switch/Disconnect On-Off 12-48V
₦29,095.00
Battery Switch or battery Disconnect, battery isolator suitable for most residential inverter installation where safety is required.
Add to cart
Himel AC Breaker 16A 1P
₦2,020.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN1C6 Ampere Rating: 16 Number of Poles: 1 Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Out of stock
Phocos PSW-H-5kW-230/48V Any-Grid Hybrid Inverter Charger
Any-Grid™ Hybrid Inverter Charger The Phocos Any-Grid Inverter Charger Series (Pure Sine Wave Hybrid) represents Phocos’ most versatile line of inverters/chargers. Flexibility and reliability are key characteristics of this product line, with a strong potential...
Read more
Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5" NPT
Weight: 18 pounds
Dimensions: 32" length and 3.9" wide
Read more
Related products
XW-CONDUIT BOX Schneider Conext
₦258,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series - Panel Mount Breakers
100 A
150 VDC
1/4" stud, 3/4" wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Add to cart
3KW Solar System
8 pcs of 350W monocrystalline panels,
2 sets of foreign mounting rails and accessories,
combined box and
40metres of 6mm flex cable.
Installation and logistics not inclusive
Read more
Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5" NPT
Weight: 18 pounds
Dimensions: 32" length and 3.9" wide
Read more
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
MC4 Branch Solar Connector 3 to 1
₦6,540.00
MC4 T 3 in 1 Solar Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating:Â 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
FM80 Solar Charge Controller Outback System
₦502,425.00
FM80 Solar Charge Controler
12/24/36/48/60V @ 80A MPPT
DC Voltage: 12 / 24 / 48 / 60 V
Array Max Power: 1000 / 2000 / 4000 / 5000 W
Max. Open Circuit Voltage: 150 Voc
Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.
Add to cart
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
DC Disconnect 250 Amp DC Battery Breaker
₦110,816.00
Schneider Electric 250 Amp DC Battery Breaker (865-1065)
This circuit breaker is designed to fit the XW power distribution panel and other generic and proprietary enclosure
suitable for other products like
Magnum, Outback
Compatible with :
XW+8548
XW+7048
XW+6048
MS4348 Magnum
Add to cart
Reviews
There are no reviews yet.