SmartSolar MPPT 250/100-Tr VE.Can

  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Optional: pluggable LCD display
  • Battery voltage: 12, 24, 48 Volts DC (36VDC can be set up with software tool)
  • Rated charge current: 100 Amps
  • Max. PV short circuit current: 70 Amps
  • Weight: 9.92 lbs (4.5 kg)
  • Dimensions (inches / millimeters): 8.5″ x 11.61″ x 4.06″ / 216 x 295 x 103 mm

 

  • Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App.

  • MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

Midnite Solar 115V/300V Surge Protector Device MNSPD

The MidNite Solar 115V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for battery circuits. The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits. The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
Read more

Morningstar TS-45

Technology : PMW Norminal Battery Voltage : Selectable -12,24,36,48V Maximum Current Output :60amps Open Circuit Voltage:125VDC Status Display:LED with Optional meter Weight:1.6KG
Read more

Xantrex Solar Charge Controller PMW C35

113,620.00
C60=49,507.84 With display Meter=N75,835.84 C40=45,491.19 with display Meter=N71,819.19 C35=34,044.49 With display Meter=N60,372 Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. C12-12V C35-12V/24V (55 VDC) C40-12V/24V/48V (125 VDC) C60-12V/24V (55 VDC) with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart

Schneider Conext SCP: Solar System Control Panel

359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
Weight 0.9 kg
Dimensions 9.0 × 11.0 × 3.0 in
    The XW+/SW SCP is a Xanbusâ„¢-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System. Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor • Multiple SCP can be used on the same Xanbus network • Compatible with Conext ComBox
Add to cart

Select at least 2 products
to compare