Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Monbat Battery 2V 600ah AGM Battery -2MVR600 Nigeria
₦191,360.00
Monbat 2V 600ah AGM battery
Add to cart
Design life at 20 °C: Very Long life 12+ years
Operating temperature:20 °C to +60 °C (maximum)
+15 °C to +25 °C (recommended)
Monbat battery distributor Firstoption, 9jasolartech
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
SmartSolar MPPT 150/60-Tr
Victron BlueSolar MPPT 150/60-Tr Charge Controller - 60 Amps / 150 Volts 
MC4 Solar Connector
₦1,550.00
MC4 Solar Connector Male and Female (pair) PV Connector Solar Connector Electrical Connector for solar cable , 4mm diameter , rated at 1500V. The MC4 system consists of a plug and socket design. Black color
Add to cart
Mnedc 175A DC Battery Breaker
₦76,812.00
MNEDC 175A DC Battery Breaker 125VDC
Made by Midnite USA
MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
Compatible with
SW4048
MS4338PE
VFXR3048E
Add to cart
Related products
Schneider conext Inverter/Charger SW4048 230V(4400W)
₦2,297,568.00
ConextTM SW is perfect for off-grid, backup power and self-consumption applications,
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
Victron MultiPlus-II 24/3000/70-32 Victron
The new Victron MultiPlus-II 24/3000/70-32 230V is the first 24 volt model of the new generation MultiPlus-II inverter/charger range
Read more
MULTIPLUS II 48/3000/35-32 230v GX PMP485021010 Victron Energy
MULTIPLUS II 24/3000/70 32VICTRON 230V MULTIPLUS II PURE SINE WAVE INVERTER / CHARGER • 24V 3000VA INVERTER 35A BATTERY CHARGER WITH 32A AUTOMATIC TRANSFER SWITCH
MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series - Panel Mount Breakers
100 A
150 VDC
1/4" stud, 3/4" wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Add to cart
Schneider Xantrex Inverter/Charger Xantrex XW4548E Replaced with 7048
₦2,640,625.00
Schneider Xantrex Inverter/Charger Xantrex XW4548E 4.5kw 230V
Provides output power of 4500 W AC at 240V
True sine wave provides clean output for sensitive electronics
Wall mount is ideal for wiring purposes
he Xantrex XW4548 by Schneider Electric is a hybrid Inverter with built-in charger. It will accept 44V DC to 64V DC from a solar array for charging batteries. It also accepts 120VAC and 240VAC for the charging circuit.
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
Reviews
There are no reviews yet.