Schneider Conext Solar Charge Controller 60A- 150Vdc

₦921,990.00

Mechanical Data

Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount – Indoor Only
Cable Entry: 7/8″ and 1″ Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C

Add to Wishlist
Categories: , , , ,
Tags: , , , , , , , ,

 

Schneider Electric Conext MPPT 60 PV Solar Charge Controller

The Xantrex MPPT Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries.

The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominal-voltage array. For example, the XW SCC can charge a 12-volt battery from a 36-volt array. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The XW Solar Charge Controller can be installed (in single or multi-unit configurations) with Xantrex XW Hybrid Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.

Reviews

There are no reviews yet.

Be the first to review “Schneider Conext Solar Charge Controller 60A- 150Vdc”

Your email address will not be published. Required fields are marked

outback hub4 firstoption 9jasolartech
, , , ,

Hub 4 Outback Port Communication Manager Outback power system

Outback , Schneider
₦139,657.00
Varanise CN Tee NOK 449, Hilfiger Denim - NELLY.COM. Marfa authentic High Life veniam. Tumblr poThe HUB-4 communication manager allows the MATE to control and monitor a maximum of four OutBack products
Add to cart

Out of stock

Outback SPCIIM-5000-48 Solar O Grid-Hybrid Inverter

Models: SPCIIM-5000-48 • Pure sine wave inverter • Output Power Factor up to 1 • Output Power up to 5000 Watts • Maximum 9 units in parallel / three phase, configurable • Built-in MPPT up...
Read more
,

Himel Switch 1gang 1way

₦2,120.00
Add to cart
, , ,

Colour control GX Retail Victron Energy

victron
easy to use display monitor
Read more
, ,

Outback Power Systems MATE3s Remote

Outback
₦484,250.00
Program, manage and monitor entire system The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart

Prosine 1800i Xantrex Inverter

₦493,655.00
PROsine 1800 Inverter - Inverters deliver true sine wave output that is identical to AC power supplied by your utility.
Add to cart

Related products

, , , , ,

SmartSolar Pluggable Display Victron Energy

victron
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
, ,

Xantrex Solar Charge Controller PMW C40

₦101,733.00
C60=49,507.84 With display Meter=N75,835.84 C40=45,491.19 with display Meter=N71,819.19 C35=34,044.49 With display Meter=N60,372 Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. C12-12V C35-12V/24V (55 VDC) C40-12V/24V/48V (125 VDC) C60-12V/24V (55 VDC) with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart

TriStarMPPT600V

Morningstar TriStarS-MPPT -60-600V Technology : MPPT Norminal Battery Voltage : Selectable -12,36,48,60V Maximum Current Output :60amps Maximum Solar array Capacity : @48V=3200watts Open Circuit Voltage:525VDC Status Display:LED with Optional meter Weight:9.0KG
Read more
,

Magnum PT-100 MPPT Solar Charge Controller

Maximum Power Point Tracking technology for increased PV power output efficiency. • Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc). • Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage Single controller supports large PV array up to 6600W. • Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
,

SmartSolar MPPT 150/60-Tr 

Victron BlueSolar MPPT 150/60-Tr Charge Controller - 60 Amps / 150 Volts
Read more
, , , , , ,

Outback Power VFXR3048E – Inverter/Charger

Outback
₦1,404,150.00
Outback power system inverters are made in USA. Modular, stackable design; ( you can combine multiple units to achieve higher wattage rating , in single phase or 3phase up to 93% operating efficiency; 7 programmable...
Add to cart
, , , ,

OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller

Outback
₦1,169,090.00
FM100-300VDC-AFCI Specifications: Nominal battery system voltage: 24, 36, & 48 Volts DC Charging range output: 20 - 68 Volts DC Controller type: MPPT Minimum battery bank size: 100 Amp-hours Maximum continuous output current: 100 Amps Maximum input current: 64 Amps Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts Maximum PV system voltage: 300 Volts DC Operating input voltage range: 30 - 290 Volts DC Peak efficiency: 98.8% at 48VDC Remote display & controller: MATE3s compatible (purchased separately) Data logging: 128 days Enclosure protection rating: IP54 Weight: 19.75 pounds (8.9 kg) Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1 FM100_specsheet
Add to cart
,

Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A

₦90,258.00
Smart 3- 40A Chat with us MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series MPPT working voltage range=DC60~DC100V Features: 1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller. 2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently. 3. Maximum PV input voltage up to DC100V. 4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
, ,

SmartSolar MPPT 250/100-Tr VE.Can

Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller up to 48VDC at 100 Amps

Read more
,

Conext MPPT 80 Solar PV Charge Controller 865-1032

₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032 600V PV input, 48V battery Input, 80A current. Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
© 2019-2024 9JaSolaterch.com. All Rights Reserved.