SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
SW AC Breakers KIT for Stacked 230VAC System
| Brand Name | Schneider Electric |
|---|
Shipping Weight: 25 pounds
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger. It allows you to combine the output of two Conext SW inverters. This kit is designed specifically for the 230 volts AC inverter models. It needs to be purchased with the Conext SW AC Switchgear.
Schneider Breaker 100A 865-1080 1P
₦56,712.00
Schneider Breaker 100A 865-1080 125V 1P, – Inverter to Battery Connection , Charge Controller to Battery Connection. Also Called Midnite 100A DC Panel Mount Breaker This breaker is Panel Mounted Suitable for use with :...
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
Battery Charger 24V 15A
₦52,900.00SPECIFICATION
INPUT
Voltage Range:– 165-285VAC Frequency :– 40-70Hz Current:- 8A (Max.) @full loadOUTPUT
Max. Output Current:- 4A ± 8A± 10A± 12A± 15A± 15A± 20A± 0.4A 0.8A 1A 1.2A 1.5A 1.5A 20A Output Voltage 240V 120V 96V 72V 48V 36V 24V Max. Output Char. 960W 960W 960W 960W 720W 540W 480WPHYSICAL
Dimension (DxWxH):– 300x165x95cm Net Weight: 3.6 3.1ENVIRONMENT
Operating Humidity:- 5-95% RH (non-condensing) Operating Temperature:- 0-40°C Noise Level:- Less than 50db (A) @CC model & full load
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Schneider Telecommunication Accessories TV CO-Axial Outlet 2gangs
₦5,582.00
Main range of product Vivace device short name KB31 product or component type TV socket device presentation Complete mechanism Complementary number of gangs 2 gang number of outputs 2 Colour tint White material Polycarbonate: surround...
Add to cart
Outback Radian 7Kw 48V Off-Grid Inverter GS7048E
₦4,523,082.00
Outback Radiant GE7048E
230V
56.7kg
radianseries_7048e_3548e_specsheet
Add to cart
radianseries_7048e_3548e_specsheet
Related products
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series - Panel Mount Breakers
100 A
150 VDC
1/4" stud, 3/4" wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
Reviews
There are no reviews yet.