Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Schneider Vivace Flush Switch 10A 2gang Press Switch KB32BP
₦3,388.00
Main range Vivace product or component type Switch device short name KB32bp device application Control device presentation Complete mechanism Complementary switch function Press actuator Rocker number of gangs 2 gang colour tint White material Polycarbonate:...
Add to cart
Himel Breaker DC 16A 2Poles
₦8,450.00
Himel 16A 2P C 6K DC 500V Miniature Circuit BreakerHDB3WZ2C16
Add to cart
HTND-20kVA Himel Output 230V Digital Meter With 02 Fans 1ph
₦575,999.00
HTND-20kVA (Cabinet)Terminal Output 230V Digital Meter With 02 Fans 140V-250V
Himel AC Breaker 25A 2Pole
₦2,620.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN2C25 Ampere Rating: 25 Number of Poles: 2Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Related products
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
DC Disconnect 250 Amp DC Battery Breaker
₦110,816.00
Schneider Electric 250 Amp DC Battery Breaker (865-1065)
This circuit breaker is designed to fit the XW power distribution panel and other generic and proprietary enclosure
suitable for other products like
Magnum, Outback
Compatible with :
XW+8548
XW+7048
XW+6048
MS4348 Magnum
Add to cart
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
Beaver, Inverters, Manufacturer, Meter & Monitoring, PV Inverter Grid Tied, PV Inverter Off-Grid, Solar Panel View
Beaver Inverter 7.2KVa 48V (B7048LPSW)
₦1,072,547.00
MPPT SOLAR INVERTER
Model Name: B7048LPSW
Color: White and Black
Operating Temperature Range -10-50°C
Inverter Mode
Rated Power:7200VA/7200W
DC Input: 48VDC, 164.8A
AC Output: 230VAC, 50/60HZ, 31.3A, 1Φ
AC Charger Mode:
AC Input: 230VAC, 50/60Hz, 52.2A 1Φ
DC Output: 54VDC,
MAX. 80A, Default 30A
AC Output: 230VAC, 50/60Hz, 31.3A 1Φ
Solar Charger Mode:
Rated Power: 4000W X2
Nominal Operating Voltage:240VDC
Max. Solar Voltage (VOC): 500VDC
MPPT Voltage range: 90∼450VDC
Enclosure: IP 21
Over Voltage Category Mains: OVC III
Add to cart
Interface MK3-USB (VE.BUS to USB)
₦31,000.00
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Add to cart
MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series - Panel Mount Breakers
100 A
150 VDC
1/4" stud, 3/4" wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
MN Big Babybox
₦19,375.00
Environmental Rating - Type 1 (Indoor)
Big Baby’s DIN rail accepts up to 4 breakers (not included)
Quad accepts up to 4 panel mount breakers (not included)
Breakers: 1-63A
Max. Wire - breakers 6 AWG
Max. AC Voltage - 277VAC
Max. DC Voltage - 300VDC
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
Add to cart
Himel AC Breaker 16A 1P
₦2,020.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN1C6 Ampere Rating: 16 Number of Poles: 1 Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Reviews
There are no reviews yet.