Outback power system inverters are made in USA.

Modular, stackable design; ( you can combine multiple units to achieve higher wattage rating , in single phase or 3phase up to 93% operating efficiency; 7 programmable modes; quick system configuration; easy system upgradability and Advanced Battery Charging (ABC).

-48V versions
-Seven programmable modes, including GridZero and Support Mode and built-in networked communications
-Modular, stackable design for up to 9 inverters in three-phase and 10 inverters in grid-tied
-Up to 93% operating efficiency
-Easy system upgradability in the field
-Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow chemistry batteries
-System configuration is quick with smart programming wizards
-The OutBack Power VFXR3048E can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location.

Dimensions (LxWxH): 16.25 × 8.25 × 12 inches · Weight: 28 kg · Single-phase, 230V

Weight 28 kg
Dimensions 16.25 × 8.25 × 12 cm

Reviews

There are no reviews yet.

Be the first to review “Outback Power VFXR3048E – Inverter/Charger”

Your email address will not be published. Required fields are marked

Interface MK3-USB (VE.BUS to USB)

31,000.00
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Add to cart

Midnite Solar 115V/300V Surge Protector Device MNSPD

The MidNite Solar 115V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for battery circuits. The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits. The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
Read more

Beaver Mini Battery Switch/Disconnect On-Off 12-48V

29,095.00
Battery Switch or battery Disconnect, battery isolator suitable for most residential inverter installation where safety is required.
Add to cart

Himel AC breaker 6A 1P

2,120.00
Product details Brand: Himel Curve Type: CModel: HDB3WN1C6 Ampere Rating: 6 Number of Poles: 1 Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart

Schneider Conext SCP: Solar System Control Panel

359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
Weight 0.9 kg
Dimensions 9.0 × 11.0 × 3.0 in
    The XW+/SW SCP is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System. Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor • Multiple SCP can be used on the same Xanbus network • Compatible with Conext ComBox
Add to cart

Himel AC Breaker 25A 2Pole

2,620.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN2C25 Ampere Rating: 25 Number of Poles: 2Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart