OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 – 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 – 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
Outback power system is made in USA.
The advanced FM100 MPPT algorithm offers increased energy harvest from the PV array than other MPPT controllers. The FLEXmax 100 delivers both higher voltage and higher power, offering improved flexibility and performance.
The compact, outdoor-rated enclosure keeps dust and moisture from damaging internal components. With the addition of arc and ground fault protection, and rapid shutdown capacitor discharge, the FLEXmax 100 is the most versatile high power MPPT controller on the market. Configuring the FLEXmax 100 in your system is easy with 128 days of built-in data storage, smart programming wizards (MATE3s required), and connectivity with OPTICS RE, so you can monitor, command, and control from one location.
The FM100-300VDC is a top-of-the-line high performance, efficient and versatile charge controller for your advanced power system.
| Weight | 8.9 kg |
|---|---|
| Dimensions | 23 × 8.8 × 6.0 cm |
Sunlight 2V 5 RES OPzV 780 PB
₦568,000.00
Technical features
Add to cart
| Positive Plates | Tubular |
| Plate Alloy | Lead Calcium Tin |
| Positive Active Mass | Red Lead made from 99.99% Pure Lead |
| Negative Active Mass | Inhouse Production of Lead Oxide |
| Electrolyte | High Purity GEL Form |
| Container | ABS |
| Lid | ABS |
| Separator | Highly Porous Leaf |
| Gauntlet | Wooven |
| Bottom Bar | Ultrasonic Welding |
| Pressure Relief Valve | Integral Flame Arrestor |
| Terminal | Sliding Insulated Pole (M10) |
| Connectors | Insulated Flexible Bolt-on |
| Bolt | Plastic Headed Bolt |
| Cycle Life | up to 3000 Cycles (50% DoD & 20 °C) |
| Operating Temperature | -20 to 45 °C |
Schneider Flush Switch 16AX 2ways 1gang KB31
₦2,425.00
Main range Vivace product or component type Switch device short name KB31 device presentation Complete mechanism Complementary switch function 2 way actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate: grid plate...
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Beaver, Inverters, Manufacturer, Meter & Monitoring, PV Inverter Grid Tied, PV Inverter Off-Grid, Solar Panel View
Beaver Inverter 7.2KVa 48V (B7048LPSW)
₦1,072,547.00
MPPT SOLAR INVERTER
Model Name: B7048LPSW
Color: White and Black
Operating Temperature Range -10-50°C
Inverter Mode
Rated Power:7200VA/7200W
DC Input: 48VDC, 164.8A
AC Output: 230VAC, 50/60HZ, 31.3A, 1Φ
AC Charger Mode:
AC Input: 230VAC, 50/60Hz, 52.2A 1Φ
DC Output: 54VDC,
MAX. 80A, Default 30A
AC Output: 230VAC, 50/60Hz, 31.3A 1Φ
Solar Charger Mode:
Rated Power: 4000W X2
Nominal Operating Voltage:240VDC
Max. Solar Voltage (VOC): 500VDC
MPPT Voltage range: 90∼450VDC
Enclosure: IP 21
Over Voltage Category Mains: OVC III
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
Related products
TriStarMPPT600V
Morningstar TriStarS-MPPT -60-600V
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,36,48,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@48V=3200watts
Open Circuit Voltage:525VDC
Status Display:LED with Optional meter
Weight:9.0KG
Read more
Morningstar TS-45
Technology : PMW
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Open Circuit Voltage:125VDC
Status Display:LED with Optional meter
Weight:1.6KG
Read more
Morningstar SL-10L,12V,SL-10-24V
Technology : PMW
Norminal Battery Voltage : Selectable -12,24
Maximum Current Input/Output:10-20amps
Maximum Solar array Capacity :Weight:0.26KG
Read more
I-panda Smart MPPT Solar Charge Controller
₦427,996.00
I-P-Smart1-96V Series
MPPT SOLAR CHARGE CONTROLLER DC96V 20A~30A SERIES
I-Panda MPPT Solar Charge Controller 30A, 300V/96V
This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller，making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented, Sealed, Gel, NiCd).
12V/24V/48V/96V system auto recognize for easy control.
12V/24V/48V system maximum solar input is DC 150V ,96V system maximum solar input is DC 300V ;
Add to cart
Xantrex Solar Charge Controller PMW C40
₦101,733.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
FM80 Solar Charge Controller Outback System
₦502,425.00
FM80 Solar Charge Controler
12/24/36/48/60V @ 80A MPPT
DC Voltage: 12 / 24 / 48 / 60 V
Array Max Power: 1000 / 2000 / 4000 / 5000 W
Max. Open Circuit Voltage: 150 Voc
Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.
Add to cart
SmartSolar MPPT 150/70-Tr VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Read more
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Reviews
There are no reviews yet.