Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Conext Auto Generator Start for XW+/ SW
| Weight | 0.9 kg |
|---|---|
| Dimensions | 6.0 × 2.0 × 4.0 in |
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads. It does this by continuously monitoring the battery voltage, state-of-charge, or the inverter charge mode, starting and stopping the generator when the battery needs additional charging.
CCGX WIFI module simple (nano USB) Victron Energy
₦26,737.00
CCGX WiFi module simple (Nano USB), small, low cost. Victron part number BPP900100200
Add to cart
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
Lithium Battery 100A (AKKUTECH)
Features: The whole module is non -toxic, non-poll uting and environmentally friendly; Cathode material is made from LiFePO4 with safety performance and long cycle life; Battery managem ent system (BMS)has protection functions including over -discharge,over...
Read more
Xantrex Solar Charge Controller PMW C60
₦88,013.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 - 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 - 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
FM100_specsheet
Add to cart
Related products
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
Schneider conext Inverter/Charger SW4048 230V(4400W)
₦2,297,568.00
ConextTM SW is perfect for off-grid, backup power and self-consumption applications,
Add to cart
DC Disconnect 250 Amp DC Battery Breaker
₦110,816.00
Schneider Electric 250 Amp DC Battery Breaker (865-1065)
This circuit breaker is designed to fit the XW power distribution panel and other generic and proprietary enclosure
suitable for other products like
Magnum, Outback
Compatible with :
XW+8548
XW+7048
XW+6048
MS4348 Magnum
Add to cart
SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
Schneider Xantrex Inverter/Charger Xantrex XW4548E Replaced with 7048
₦2,640,625.00
Schneider Xantrex Inverter/Charger Xantrex XW4548E 4.5kw 230V
Provides output power of 4500 W AC at 240V
True sine wave provides clean output for sensitive electronics
Wall mount is ideal for wiring purposes
he Xantrex XW4548 by Schneider Electric is a hybrid Inverter with built-in charger. It will accept 44V DC to 64V DC from a solar array for charging batteries. It also accepts 120VAC and 240VAC for the charging circuit.
Add to cart
Reviews
There are no reviews yet.