Sunbird off grid bi directional solar inverter 250Kva 600V Online Solar  Hybrid system is the new generation inverter, which has been designed specially for the solar application, made by FujiElectric Consul Neowatt (Japan/Indian Collaboration).

Suitable for mini grid inverter, Medical inverter, datacenter inverter,Residential backup Inverter,Library system Inverter.

SUNBIRD 3000 is Three phase output, industrial grade Inverter system. The Inverter module can operate in parallel with AC input source.

In normal mode, Inverter operates from battery or array power source and produces 3 phase conditioned AC output to cater the load requirement.

 

Suitable for :

  • mini grid inverter
  • Medical inverter
  • datacenter inverter
  • Residential backup Inverter
  • Library system Inverter
  • Petrol & Gas station
  • Factory
  • Water Pumping & Circulation
  • Military and Security application
  • CCTV Camera Backup

MPPT

MPPT Voltage-330-480V

Mppt Maximum Input Current (A)-105A

No. of charge controller-1

Charging Current(Max) from PV in Amp-111A

Grid

3ph

Nominal Voltage & Voltage Range-3Phase 4 Wire / 415VAC(+10%, -15%), 50Hz

Charging Current(Max) from Grid in Amp-55A

Battery

Battery Voltage-240V

Battery Type-SMF/VRLA/Wet Lead Acid/ TGel

Output Waveform-sine wave

Nominal Output Current (A)-415VAC L-L (240VAC L-N) / (Pure Sine Wave)

Overload at nominal output voltage for 10 minutes-125%

Overload at nominal output voltage for 1 minutes-150%

Inverter peak efficiency-Up to 92%

Galvanic Isolation-Inbuilt isolation transformer at inverter output

Special Features

Special Features

Multiple 32 bit DSP controllers Space Vector Modulation Battery less operation

High efficiency

True Bi-directional Solar Inverter

Higher Array voltage capacity optionally available

Inbuilt charge controller

MPPT – Achieved through Incremental Conductance Algorithms

Modular construction gives higher MTTR Battery charging through Grid up to 100% Selectable source feature – Grid / Battery

DC fan for low power consumption

Inbuilt isolation transformer for galvanic isolation 128 x 64 Graphics display

PF correction while on mains / Grid supply (Line interactive) Variable fan speed – for increased reliability, results into

lesser dust suction inside the cabinet

The built in solar charge controller can accommodate up to 11kw of solar panel

MPPT based array charger, supplies the DC power for battery charging as well as for the inverter.

In case batteries are going in to discharge mode due to array unhealthy, Grid input source will get triggered automatically at certain predetermined battery voltage level and operate in parallel with the inverter. Grid Input source starts battery charging as well as takes care of output load and after sufficient battery charge level, it will automatically isolates from the inverter.

Sunbird 3000 Solar inverter has many unparallel features, which gives best ROI for the user and helps in bringing the dream of Green planet more closer. The 30Kva is suitable for medical application and production line  due to 0 switching time.

 

CHASSIS DIMENSION (WXDXH) 600 x 800 x 1200 IP20

Storage -Operating Temperature–20 °C – 70°C

Operating Temperature-Inverter : 0-40 °C,

SMF battery : 25 to 27 Deg C

Weight 1960 kg
Dimensions 1850 × 1200 × 2020 cm

Reviews

There are no reviews yet.

Be the first to review “250Kva 600V Online Hybrid Inverter With Mppt Solar Charge Controller”

Your email address will not be published. Required fields are marked

Morningstar SL-10L,12V,SL-10-24V

Technology : PMW Norminal Battery Voltage : Selectable -12,24 Maximum Current Input/Output:10-20amps Maximum Solar array Capacity :Weight:0.26KG
Read more

Conext Auto Generator Start for XW+/ SW Schneider

200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Add to cart

Schneider Vivace Flush Switch 10A Bell Press with Bell Icon KB31BPB

2,710.00
Main range Vivace product or component type Switch device short name KB31bpb device application Control device presentation Complete mechanism Complementary switch function Bell actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate:...
Add to cart

solar mounting rail 2.5m

44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart

Himel AC Breaker 32A 2p

3,200.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN2C32 Ampere Rating: 322 Number of Poles: 2Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart

Outback Power Systems MATE3s Remote

484,250.00
Program, manage and monitor entire system The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart