Schneider Conext Solar Charge Controller 60A- 150Vdc

₦921,990.00

Mechanical Data

Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount – Indoor Only
Cable Entry: 7/8″ and 1″ Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C

Add to Wishlist
Categories: , , , ,
Tags: , , , , , , , ,

 

Schneider Electric Conext MPPT 60 PV Solar Charge Controller

The Xantrex MPPT Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries.

The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominal-voltage array. For example, the XW SCC can charge a 12-volt battery from a 36-volt array. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The XW Solar Charge Controller can be installed (in single or multi-unit configurations) with Xantrex XW Hybrid Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.

Reviews

There are no reviews yet.

Be the first to review “Schneider Conext Solar Charge Controller 60A- 150Vdc”

Your email address will not be published. Required fields are marked

Epsolar Landstar LS2024BP

Product features 1.Increases PV Array Output by up to 30% 2.Advanced Continuous Maximum Power Point Tracking 3.Full Power Output in Ambient Temperatures up to 104°F (40°C) 4.Battery Voltages from 12 VDC to 60 VDC 5.Programmable Auxiliary Control Output 6.Built-in 128 days of Data Logging 7.Fully Network Integrated and Programmable support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
,

Schneider Flush Switch 16AX 2ways 1gang KB31

Schneider
₦2,425.00
Main range Vivace product or component type Switch device short name KB31 device presentation Complete mechanism Complementary switch function 2 way actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate: grid plate...
Add to cart
,

Schneider Vivace Switched Socket with Neon 15A 1way 1gang KB15_15N

Schneider
₦5,327.00
Main range Vivace product or component type Switched socket device short name KB15 device presentation Complete product Complementary pilot light Red neon indicator outlet poles configuration 1P + E number of gangs 1 gang Colour...
Add to cart
himel 150KVA, AVR
,

HSBW-100KVA Input Range 304~456V With Digital Meter HSBW100EWF

₦4,568,750.00
Himel Voltage Regulator / Stabilizer 100Kva 3ph
Add to cart
,

MidNite Solar MNDC250

The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure. Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker. Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more

Victron Quattro 48/10000/140-100/100 230V VE.Bus Inverter

victron
Read more

Related products

,

SmartSolar MPPT 150/60-Tr 

Victron BlueSolar MPPT 150/60-Tr Charge Controller - 60 Amps / 150 Volts
Read more
, , , , , ,

Victron Quattro 48/8000/100-100/100 230v VE.Bus Victron Energy

victron
230V VE.Bus compatible with Lithium Ion batteries
Read more
Outback FM80 by Firstoption
, , , ,

FM80 Solar Charge Controller Outback System

Outback
₦502,425.00
FM80 Solar Charge Controler 12/24/36/48/60V @ 80A MPPT DC Voltage: 12 / 24 / 48 / 60 V Array Max Power: 1000 / 2000 / 4000 / 5000 W Max. Open Circuit Voltage: 150 Voc Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.  
Add to cart
, ,

Xantrex Solar Charge Controller PMW C40

₦101,733.00
C60=49,507.84 With display Meter=N75,835.84 C40=45,491.19 with display Meter=N71,819.19 C35=34,044.49 With display Meter=N60,372 Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. C12-12V C35-12V/24V (55 VDC) C40-12V/24V/48V (125 VDC) C60-12V/24V (55 VDC) with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
,

Solar Charge Controller Wiser2 Dc12v/24V 15A~50A, 50A

Wiser2 DC12V/24V 15A~50A, 50A Rated current：15A 20A 30A 40A 50A I-P-Wiser series adopted with auto cool, high conversion efficiency, LCD display and free PC software. It features an efficient MPPT control algorithm to track the maximum power point of the PV array in any environment. PV Input 150V
Read more
, ,

SmartSolar MPPT 250/100-Tr VE.Can

Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller up to 48VDC at 100 Amps

Read more
,

Morningstar SL-10L,12V,SL-10-24V

Technology : PMW Norminal Battery Voltage : Selectable -12,24 Maximum Current Input/Output:10-20amps Maximum Solar array Capacity :Weight:0.26KG
Read more

Out of stock

, , ,

Sako MPPT Solar Charge Controller 72V/30A

Sako

MAIN FUNCTION

  1. full Multi-function LCD Display, easier to check
  2. Rich operation information shows that PV voltage, current and cumulative power generation
  3. battery charging voltage are adjustable
  4. parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
  5. various status indications
  6. with the over-charge, over-load, short circuit and Anti-reverse protection
Read more
, , , , ,

SmartSolar Pluggable Display Victron Energy

victron
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
,

Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A

₦90,258.00
Smart 3- 40A Chat with us MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series MPPT working voltage range=DC60~DC100V Features: 1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller. 2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently. 3. Maximum PV input voltage up to DC100V. 4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
© 2019-2024 9JaSolaterch.com. All Rights Reserved.