Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount – Indoor Only
Cable Entry: 7/8″ and 1″ Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Schneider Electric Conext MPPT 60 PV Solar Charge Controller
The Xantrex MPPT Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries.
The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominal-voltage array. For example, the XW SCC can charge a 12-volt battery from a 36-volt array. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The XW Solar Charge Controller can be installed (in single or multi-unit configurations) with Xantrex XW Hybrid Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.
HTND2-5kVA Voltage Stabilizer Output 230V Servo Motor HTNDS5HB230
₦125,265.00
HTNDS10HB
HTND2-5kVA British-type plug Output 230V Servo Motor
Voltage Regulator 200KVA Himel HSBW200EWF 3ph
₦9,400,999.00| Three phase full automatic AC voltage stabilizer |
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Schneider conext Inverter/Charger SW4048 230V(4400W)
₦2,297,568.00
ConextTMÂ SW is perfect for off-grid, backup power and self-consumption applications,
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Schneider Vivace Flush Switch 10A Way Centre Off Retractive Switch KB31BP_2
₦4,710.00
Main range Vivace product or component type Switch device short name KB31bp_2 device application Control device presentation Complete mechanism Complementary switch function Retractive actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate:...
Add to cart
Related products
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Morningstar TS-45
Technology : PMW
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Open Circuit Voltage:125VDC
Status Display:LED with Optional meter
Weight:1.6KG
Read more
SmartSolar MPPT 250/100-Tr VE.Can
Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller up to 48VDC at 100 Amps
Solar Charge Controller ET6415BND Epsolar Etracer MPPT Solar
12/24/36/48V auto work
Advanced MPPT technology
Several seconds tracking speed
High Tracking efficiency of 99%
Peak conversion efficiency of 98%
New 60A eTracer ET6415BND MPPT Solar Charge Controller, 60amps 12V 24V 36V 48V EP Solar Battery Charge Controller Regulators
Read more
Outback Radian 7Kw 48V Off-Grid Inverter GS7048E
₦4,523,082.00
Outback Radiant GE7048E
230V
56.7kg
radianseries_7048e_3548e_specsheet
Add to cart
radianseries_7048e_3548e_specsheet
Xantrex Solar Charge Controller PMW C60
₦88,013.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
TriStarMPPT600V
Morningstar TriStarS-MPPT -60-600V
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,36,48,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@48V=3200watts
Open Circuit Voltage:525VDC
Status Display:LED with Optional meter
Weight:9.0KG
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Xantrex Solar Battery Charger, 40A,12V
TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design. Designed for marine and commercial applications worldwide, the new TRUECHARGE2 10-amp charger is the latest addition to the TRUECHARGE2 series. The new...
Read more
Reviews
There are no reviews yet.