Schneider Conext Solar Charge Controller 60A- 150Vdc

₦921,990.00

Mechanical Data

Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount – Indoor Only
Cable Entry: 7/8″ and 1″ Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C

Add to Wishlist
Categories: , , , ,
Tags: , , , , , , , ,

 

Schneider Electric Conext MPPT 60 PV Solar Charge Controller

The Xantrex MPPT Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries.

The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominal-voltage array. For example, the XW SCC can charge a 12-volt battery from a 36-volt array. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The XW Solar Charge Controller can be installed (in single or multi-unit configurations) with Xantrex XW Hybrid Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.

Reviews

There are no reviews yet.

Be the first to review “Schneider Conext Solar Charge Controller 60A- 150Vdc”

Your email address will not be published. Required fields are marked

,

Beaver Mini Battery Switch/Disconnect On-Off 12-48V

Beaver
₦29,095.00
Battery Switch or battery Disconnect, battery isolator suitable for most residential inverter installation where safety is required.
Add to cart
, , ,

Colour control GX Retail Victron Energy

victron
easy to use display monitor
Read more

Lithium Battery 200A (AKKUTECH)

Nominal Voltage-51.2V charge mode 0.2c to 56V Charge Current -40A Max Charge Current=65A Minimum discharge Voltage-44V Weight=104kg Dimension -520mmX442mmX223mm Design Life-10 years Cycle -4,000 80% DOD AT-SPEC-LiFePO4 Battery 51.2V-10.24kWh-L    
Read more
,

SW AC Breakers KIT for Stacked 230VAC System

₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
,

Himel 13A 1 gang socket plus 2gang USB

₦7,200.00
Add to cart
, , , , ,

Schneider Conext Combox Monitoring System

₦283,676.00
Schneider Conext Combox Monitoring System 865-1058 Advanced diagnostics for solar and battery systems The Conext™ ComBox is a powerful communications and monitoring device for installers and operators of Conext solar systems. It features an integrated web server, enabling graphical displays of system daily, monthly and lifetime energy data to be viewed using a simple web browser or Android™ tablet device. • Monitor solar system harvest and yield anytime, anywhere • Measure and compare energy performance over varying timelines • Receive email alerts and reduce system downtime
Add to cart

Related products

, ,

Xantrex Solar Charge Controller PMW C60

₦88,013.00
C60=49,507.84 With display Meter=N75,835.84 C40=45,491.19 with display Meter=N71,819.19 C35=34,044.49 With display Meter=N60,372 Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. C12-12V C35-12V/24V (55 VDC) C40-12V/24V/48V (125 VDC) C60-12V/24V (55 VDC) with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
,

CM/R-50 Xantrex Remote Display for Solar Charge Controller

₦55,272.00
Remote Display for C35,C40,C60,15mcable CM/R-50 Xantrex Remote Display For Solar Charge Controller Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Outback solar charge controller FM60
, , , ,

Outback Power : FLEXmax 60 FM60

Outback
₦392,370.00
Technology : MPPT Norminal Battery Voltage : Selectable -12,24,36,48V,60V Maximum Current Output :60amps Maximum Solar array Capacity : @12V=900watts,@24V=1800watts, @48V=3600watts,@60V=4500watts Open Circuit Voltage:150VDC Status Display:Bulit In Weight:5.3KG Weight:6..4KG (Shipping) Firstoption & 9jasolartech Outback distributor in Nigeria.
Add to cart
, , , ,

OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller

Outback
₦1,169,090.00
FM100-300VDC-AFCI Specifications: Nominal battery system voltage: 24, 36, & 48 Volts DC Charging range output: 20 - 68 Volts DC Controller type: MPPT Minimum battery bank size: 100 Amp-hours Maximum continuous output current: 100 Amps Maximum input current: 64 Amps Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts Maximum PV system voltage: 300 Volts DC Operating input voltage range: 30 - 290 Volts DC Peak efficiency: 98.8% at 48VDC Remote display & controller: MATE3s compatible (purchased separately) Data logging: 128 days Enclosure protection rating: IP54 Weight: 19.75 pounds (8.9 kg) Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1 FM100_specsheet
Add to cart
, , , , ,

SmartSolar Pluggable Display Victron Energy

victron
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
, ,

SmartSolar MPPT 250/100-Tr VE.Can

Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller up to 48VDC at 100 Amps

Read more
,

Morningstar SS-MPPT-15L

Technology : MPPT Norminal Battery Voltage : Selectable -12,24V Maximum Current Output :15amps Maximum Solar array Capacity : @12V=200watts,@24V=400watts, Open Circuit Voltage:75VDC Status Display:LED With PV Lighting option Weight:0.6KG
Read more
,

Solar Charge Controller ET6415BND Epsolar Etracer MPPT Solar

12/24/36/48V auto work Advanced MPPT technology Several seconds tracking speed High Tracking efficiency of 99% Peak conversion efficiency of 98% New 60A eTracer ET6415BND MPPT Solar Charge Controller, 60amps 12V 24V 36V 48V EP Solar Battery Charge Controller Regulators
Read more
, , , , , ,

Victron Quattro 48/8000/100-100/100 230v VE.Bus Victron Energy

victron
230V VE.Bus compatible with Lithium Ion batteries
Read more
,

Magnum PT-100 MPPT Solar Charge Controller

Maximum Power Point Tracking technology for increased PV power output efficiency. • Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc). • Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage Single controller supports large PV array up to 6600W. • Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
© 2019-2024 9JaSolaterch.com. All Rights Reserved.