Solar Charge Controller ET6415BND Epsolar Etracer MPPT Solar
12/24/36/48V auto work
Advanced MPPT technology
Several seconds tracking speed
High Tracking efficiency of 99%
Peak conversion efficiency of 98%
New 60A eTracer ET6415BND MPPT Solar Charge Controller, 60amps 12V 24V 36V 48V EP Solar Battery Charge Controller Regulators
Schneider Telecommunication Accessories Data Outlet 1gang KB31RJ6
₦11,825.00
Main range Vivace device short name KB31 product or component type Data socket with shutter device presentation Complete mechanism cover frame colour tint White Complementary communication network category 6 number of gangs 1 gang tightening...
Add to cart
Beaver Inverter 5KW-48V 80A B5048LPSW
₦538,200.00Solar hybrid Inverter 5kw 80A Charge Controller
Solar Inverter with built in mppt solar charge controller 80A with built in parallel function Beaver inverter is equipped with AC-DC Charger , and MPPT Solar Charge Controller to maximise and regulate DC power from the solar array for charging the battery bank.
Pylontech UP5000
The Pylontech UP5000 lithium battery is a mid-range 48V battery that is ideal for daily cycling applications with a lifetime of over 4,500 cycles at a 95% depth of discharge. This battery also suits larger domestic applications as you can parallel up to 16 units for up to 72.96kWh of high-performance energy storage.
This reliable solar storage solution comes with a 7-year warranty. However, its ultra-reliable performance and superior low failure rate mean it should last over 10 years.
Key Features:
Read more
- Modular design for ease of expansion
- Higher usable capacity resulting in fewer battery modules installed
- Usable capacity up to 4,560Wh
- Parallel Capability of up to 16 units
- Allows for large installation of up to 72.96kWh with no LV Hub
- Intelligent BMS protecting battery cells
- 95% DoD with more usable capacity
- RS485 and CAN compatible
Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5" NPT
Weight: 18 pounds
Dimensions: 32" length and 3.9" wide
Read more
Himel AC Breaker 16A 1P
₦2,020.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN1C6 Ampere Rating: 16 Number of Poles: 1 Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Schneider Vivace 3 Pin Universal Socket 13A 2ways 2gangs KBT413S
₦9,759.00
Main product or component type Socket-outlet device short name KBT413S device presentation Complete mechanism outlet standard Universal Colour tint White Complementary outlet poles configuration 2P + E number of gangs 2 gang material Polycarbonate: grid...
Add to cart
Related products
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A
₦90,258.00
Smart 3- 40A
Chat with us
MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series
MPPT working voltage range=DC60~DC100V
Features:
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently.
3. Maximum PV input voltage up to DC100V.
4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
Conext MPPT 80 Solar PV Charge Controller 865-1032
₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032
600V PV input, 48V battery Input, 80A current.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Morningstar SS-MPPT-15L
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24V
Maximum Current Output :15amps
Maximum Solar array Capacity :
@12V=200watts,@24V=400watts,
Open Circuit Voltage:75VDC
Status Display:LED
With PV Lighting option
Weight:0.6KG
Read more
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Xantrex Solar Charge Controller PMW C60/C40/C35/C12
₦100,622.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 - 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 - 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
FM100_specsheet
Add to cart
Reviews
There are no reviews yet.