Main
range
Vivace
product or component type
Switched socket
device short name
KB15
device presentation
Complete product
Complementary
pilot light
Red neon indicator
outlet poles configuration
1P + E
number of gangs
1 gang
Colour tint
White
material
Polycarbonate: grid plate
Polycarbonate: surround
Polycarbonate: base
projecting depth
8 mm
device mounting
Flush
mounting support
Wall mounted
fixing mode
By screw M3.5
fixing center
60.3 mm
embedding depth
35 mm
rated current
15 A at 250 V AC, resistive
network frequency
50 Hz
contacts material
Brass and phosphor bronze
connections – terminals
Pillar terminal
terminal identifier
N
L
Earth
tightening torque
0.4 N.m
clamping connection capacity
2 x 4 mm²
3 x 2.5 mm²
width
87 mm
height
87 mm
Environment
standards
BS 1363
SS 145
MS 589
ambient air temperature for operation
-5…40 °C
relative humidity
0…95 %
operating altitude
<= 2000 m
environmental characteristic
Indoor use
Packing Units
Package 1 Weight
92.500 g
Package 1 Height
1.000 mm
Package 1 width
1.000 mm
Package 1 Length
1.000 mm
Offer Sustainability
Sustainable offer status
Green Premium product
REACh Regulation
REACh free of SVHC
Yes
EU RoHS Directive
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
China RoHS Regulation
China RoHS declaration
Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
Contractual warranty
Warranty
18 months

Reviews

There are no reviews yet.

Be the first to review “Schneider Vivace Switched Socket with Neon 15A 1way 1gang KB15_15N”

Your email address will not be published. Required fields are marked

Schneider Conext SCP: Solar System Control Panel

359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
Weight 0.9 kg
Dimensions 9.0 × 11.0 × 3.0 in
    The XW+/SW SCP is a Xanbusâ„¢-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System. Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor • Multiple SCP can be used on the same Xanbus network • Compatible with Conext ComBox
Add to cart

FM80 Solar Charge Controller Outback System

502,425.00
FM80 Solar Charge Controler 12/24/36/48/60V @ 80A MPPT DC Voltage: 12 / 24 / 48 / 60 V Array Max Power: 1000 / 2000 / 4000 / 5000 W Max. Open Circuit Voltage: 150 Voc Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.  
Add to cart

HImel AC Breaker 63A 2pole

4,320.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN2C63 Ampere Rating: 63 Number of Poles: 2Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart

Schneider Conext Solar Charge Controller 60A- 150Vdc

921,990.00
Mechanical Data Technology: Maximum Power Point Tracking (MPPT) Dimensions: 14.50 x 5.75 x 5.50 inches Weight: 10.75 lbs Enclosure Type: Ventilated Enclosure Material: Sheet Metal Chassis Device Mounting: Vertical Wall Mount - Indoor Only Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink Recommended Wire Size: #6 AWG to #14 AWG Total Power Consumption: 2.5W (Tare) Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption) Operating Temperature Range: -20 to +45°C
Add to cart

Sunlight 2V 5 RES OPzV 780 PB

568,000.00
Technical features
Positive Plates Tubular
Plate Alloy Lead Calcium Tin
Positive Active Mass Red Lead made from 99.99% Pure Lead
Negative Active Mass Inhouse Production of Lead Oxide
Electrolyte High Purity GEL Form
Container ABS
Lid ABS
Separator Highly Porous Leaf
Gauntlet Wooven
Bottom Bar Ultrasonic Welding
Pressure Relief Valve Integral Flame Arrestor
Terminal Sliding Insulated Pole (M10)
Connectors Insulated Flexible Bolt-on
Bolt Plastic Headed Bolt
Cycle Life up to 3000 Cycles (50% DoD & 20 °C)
Operating Temperature -20 to 45 °C
 
Add to cart

Motion Sensor Lamp Holder

4,255.00
Specifications: Color: White Material: Fireproof PC Standard: EU Standard Applicable : E27 Base Wiring Method: Live Line (Red), Zero Line (Blue) Voltage: AC 110-245V, 50/60Hz PIR Sensing Distance: 2-6m / 6.56-19.69ft Delay Time: 3s/ 45s (Default)/ 300s Brightness: Bright Light/ Medium Light/ Dim Light Load : AC 110V≤40W, AC 220V≤50W Item Size: 86 * 86mm / 3.386 * 3.386in Item Weight: 72g / 2.54oz Package Size: 9.3 * 9.3 * 4.5cm / 3.66 * 3.66 * 1.77in Package Weight: 96g / 3.36oz Package List: 1 * PIR Sensor Lampholder 2 * Screw 2 * Hose

KEY FEATURES

  • Live line and zero line wired. Applicable to light with E27 base. Load : AC 110V≤40W, AC 220V≤50W.
  • Built in PIR sensor, the light will auto turn on when it detects human activity in the range of 2-6m (6.56-19.69ft).
  • Humanized design, the delay time of the LED lighting is 5/ 45 (default)/ 300 seconds adjustable after the person leaves.
  • Brightness adjustment: bright light/ medium light/ dim light. Meeting various needs in practical condtions.
  • 86x86mm standard size, concise appearance, fits well with smart life in modern home.
  • Live line and zero line wired. Applicable to light with E27 base. Load : AC 110V≤40W, AC 220V≤50W.
Add to cart