DC Disconnect 250 Amp DC Battery Breaker
₦110,816.00
Schneider Electric 250 Amp DC Battery Breaker (865-1065)
This circuit breaker is designed to fit the XW power distribution panel and other generic and proprietary enclosure
suitable for other products like
Magnum, Outback
Compatible with :
XW+8548
XW+7048
XW+6048
MS4348 Magnum
Schneider Conext™ Battery Fuse Combiner Box
₦223,437.00
Schneider Electric Conext™ Battery Fuse Combiner Box 250
The Conext™ Battery Fuse Combiner Box 250 combines up to three Conext XW or XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries, and inverter/chargers.
Add to cart
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
African Energy 200Watt AFR-200 Monocrystalline Solar Panel
₦114,257.00
Voltage at Pmax (Vmp) [V] 37.77 Current at Pmax (Imp) [A] 5.29 Open Circuit Voltage (Voc) [V] 45.25 Short Circuit Current (Isc) [A] 5.92 Power Tolerance +/- 3% (referenced to the Nominal Output) Maximum System...
Add to cart
Beaver, Inverters, Manufacturer, Meter & Monitoring, PV Inverter Grid Tied, PV Inverter Off-Grid, Solar Panel View
Beaver Inverter 7.2KVa 48V (B7048LPSW)
₦1,072,547.00
MPPT SOLAR INVERTER
Model Name: B7048LPSW
Color: White and Black
Operating Temperature Range -10-50°C
Inverter Mode
Rated Power:7200VA/7200W
DC Input: 48VDC, 164.8A
AC Output: 230VAC, 50/60HZ, 31.3A, 1Φ
AC Charger Mode:
AC Input: 230VAC, 50/60Hz, 52.2A 1Φ
DC Output: 54VDC,
MAX. 80A, Default 30A
AC Output: 230VAC, 50/60Hz, 31.3A 1Φ
Solar Charger Mode:
Rated Power: 4000W X2
Nominal Operating Voltage:240VDC
Max. Solar Voltage (VOC): 500VDC
MPPT Voltage range: 90∼450VDC
Enclosure: IP 21
Over Voltage Category Mains: OVC III
Add to cart
Schneider Telecommunication Accessories Data Outlet 1gang KB31RJ6
₦11,825.00
Main range Vivace device short name KB31 product or component type Data socket with shutter device presentation Complete mechanism cover frame colour tint White Complementary communication network category 6 number of gangs 1 gang tightening...
Add to cart
Schneider conext Inverter/Charger SW4048 230V(4400W)
₦2,297,568.00
ConextTM SW is perfect for off-grid, backup power and self-consumption applications,
Add to cart
Related products
Himel DC breaker 20A 2Poles
₦8,450.00
Himel 20A 2P C 6K DC 500V Miniature Circuit Breaker HDB3WZ2C20
Add to cart
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Himel AC Breaker 20A 2pole
₦2,620.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN2C20 Ampere Rating: 20 Number of Poles: 2Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Himel AC Breaker 16A 2p
₦3,150.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN2C16 Ampere Rating: 16 Number of Poles: 2Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Reviews
There are no reviews yet.