Schneider Conext™ Battery Fuse Combiner Box
₦223,437.00
Schneider Electric Conext™ Battery Fuse Combiner Box 250
The Conext™ Battery Fuse Combiner Box 250 combines up to three Conext XW or XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries, and inverter/chargers.
SmartSolar MPPT 150/70-Tr VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Read more
Schneider Xantrex Inverter/Charger Xantrex XW4548E Replaced with 7048
₦2,640,625.00
Schneider Xantrex Inverter/Charger Xantrex XW4548E 4.5kw 230V
Provides output power of 4500 W AC at 240V
True sine wave provides clean output for sensitive electronics
Wall mount is ideal for wiring purposes
he Xantrex XW4548 by Schneider Electric is a hybrid Inverter with built-in charger. It will accept 44V DC to 64V DC from a solar array for charging batteries. It also accepts 120VAC and 240VAC for the charging circuit.
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Schneider Flush Switch 16AX 2ways 4gangs KB34
₦5,775.00
Main range Vivace product or component type Switch device short name KB34 device presentation Complete mechanism Complementary switch function 2 way actuator Rocker number of gangs 4 gang colour tint White material Polycarbonate: grid plate...
Add to cart
Fortress Lithium eFlex 5.4kWh LFP Battery
₦3,050,000.00eFlex 5.4 Fortress Compatibility
| Sol-Ark ** | 8 KW & 12 KW Inverter | AC or DC coupled |
| Schneider ** | Conext XW MPPT charge controller; Conext XW+/XW pro **** series | AC or DC coupled |
| Outback | Skybox, FLEX max charge controller (48V), FLEXpower series (48V); Radian series (48V); FXR(A) and FXR (E) series (48V); GVFX and GVFX series (48V); | AC or DC coupled |
| Magnum | MS 4448PAE; MS 4048-20B | AC or DC coupled |
| Studer * | AJ 400/700-48 Series; XTS 1400/2600/4000/6000/8000-48 Series; VT 40/65/80 Series; VS 70/120 | AC or DC coupled |
| SMA * | SUNNY ISLAND 4548-US/6048-US; SUNNY ISLAND 3.0M/4.4M/6.0H/8.0H | AC coupled |
| Victron * | Phoenix VE.Direct Inverter; MultiPlus and Quatro Inverter/Charger; Skylla-TG Charger; General; Color Control or Venus GX | DC coupled |
| Morning Star | TriStar MPPT 600V; TriStar MPPT; Tristar PWM | DC coupled |
| Midnite Solar | Solar Classic 150, 200 & 250; Solar Classic 150, 200 & 250-SL |
eFlex 5.4
Related products
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
Outback Power : FLEXmax 60 FM60
₦392,370.00
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=900watts,@24V=1800watts,
@48V=3600watts,@60V=4500watts
Open Circuit Voltage:150VDC
Status Display:Bulit In
Weight:5.3KG
Weight:6..4KG (Shipping)
Firstoption & 9jasolartech Outback distributor in Nigeria.
Add to cart
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Out of stock
Canadian Solar – CS3L-375MS
₦212,060.00
Description
Read more
CS3L-375MS
Measurements
Manufacturer warranty
Certificates
IEC 61730 - Safety Qualification
| Nominal power: | 375 W |
| Celltype: | Mono |
| Number of cells: | 120 |
| Module efficiency: | 20,27 % |
| Power Tolerance: | n/a |
| System Voltage: | 1500 V |
| Incl. optimizer: | no |
| Length: | 1.765 mm |
| Width: | 1.048 mm |
| Frame thickness: | 35 mm |
| Frame color: | silver/white |
| Weight: | 21 kg |
| Snow load: | 5.400 Pa |
| Wind load: | 3.600 Pa |
| Pieces per pallet: | 30 |
| Product warranty: | 12 years |
| Power warranty: | 25 years on 0.55% of nominal power |
Xantrex Solar Charge Controller PMW C40
₦101,733.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Conext MPPT 80 Solar PV Charge Controller 865-1032
₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032
600V PV input, 48V battery Input, 80A current.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
Xantrex Solar Charge Controller PMW C60/C40/C35/C12
₦100,622.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5" NPT
Weight: 18 pounds
Dimensions: 32" length and 3.9" wide
Read more
Reviews
There are no reviews yet.