Schneider Conext™ Battery Fuse Combiner Box
₦223,437.00
Schneider Electric Conext™ Battery Fuse Combiner Box 250
The Conext™ Battery Fuse Combiner Box 250 combines up to three Conext XW or XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries, and inverter/chargers.
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
SW AC Breaker Panel 230
₦305,000.00
The ConextTM SW Power Distribution Panels are pre-wired out of the box and labeled to support the integration of Conext SW inverter/chargers with a Conext MPPT Solar Charge Controller, battery bank and load centers.
Add to cart
Midnite Solar 115V/300V Surge Protector Device MNSPD
The MidNite Solar 115V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for battery circuits.
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
Read more
Himel AC Breaker 10A 3Pole
₦6,520.00
Product Details Brand: Himel Curve Type: CModel: HDB3WN3C100 Ampere Rating: 100 Number of Poles: 3Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Related products
Out of stock
Canadian Solar – CS3L-375MS
₦212,060.00
Description
Read more
CS3L-375MS
Measurements
Manufacturer warranty
Certificates
IEC 61730 - Safety Qualification
| Nominal power: | 375 W |
| Celltype: | Mono |
| Number of cells: | 120 |
| Module efficiency: | 20,27 % |
| Power Tolerance: | n/a |
| System Voltage: | 1500 V |
| Incl. optimizer: | no |
| Length: | 1.765 mm |
| Width: | 1.048 mm |
| Frame thickness: | 35 mm |
| Frame color: | silver/white |
| Weight: | 21 kg |
| Snow load: | 5.400 Pa |
| Wind load: | 3.600 Pa |
| Pieces per pallet: | 30 |
| Product warranty: | 12 years |
| Power warranty: | 25 years on 0.55% of nominal power |
Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5" NPT
Weight: 18 pounds
Dimensions: 32" length and 3.9" wide
Read more
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
Conext MPPT 80 Solar PV Charge Controller 865-1032
₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032
600V PV input, 48V battery Input, 80A current.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
African Energy 200Watt AFR-200 Monocrystalline Solar Panel
₦114,257.00
Voltage at Pmax (Vmp) [V] 37.77 Current at Pmax (Imp) [A] 5.29 Open Circuit Voltage (Voc) [V] 45.25 Short Circuit Current (Isc) [A] 5.92 Power Tolerance +/- 3% (referenced to the Nominal Output) Maximum System...
Add to cart
Solar Charge Controller ET6415BND Epsolar Etracer MPPT Solar
12/24/36/48V auto work
Advanced MPPT technology
Several seconds tracking speed
High Tracking efficiency of 99%
Peak conversion efficiency of 98%
New 60A eTracer ET6415BND MPPT Solar Charge Controller, 60amps 12V 24V 36V 48V EP Solar Battery Charge Controller Regulators
Read more
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
3KW Solar System
8 pcs of 350W monocrystalline panels,
2 sets of foreign mounting rails and accessories,
combined box and
40metres of 6mm flex cable.
Installation and logistics not inclusive
Read more
Reviews
There are no reviews yet.