Schneider Conext™ Battery Fuse Combiner Box
₦223,437.00
Schneider Electric Conext™ Battery Fuse Combiner Box 250
The Conext™ Battery Fuse Combiner Box 250 combines up to three Conext XW or XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries, and inverter/chargers.
Out of stock
Rolls Surrette S-550 6V Battery
Rolls Surrette S-550 6V Battery, 428Ah Deep Cycle Flooded Lead Acid Battery. Rolls Surrette S-550 6V 428Ah Deep Cycle Flooded Lead Acid Battery Solar Applications. Rolls Battery Series 4000 Model S-550, Voltage: 6V (3 cells), CCA:...
Read more
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
Schneider Flush Switch 16AX 2ways 4gangs KB34
₦5,775.00
Main range Vivace product or component type Switch device short name KB34 device presentation Complete mechanism Complementary switch function 2 way actuator Rocker number of gangs 4 gang colour tint White material Polycarbonate: grid plate...
Add to cart
Related products
Morningstar SL-10L,12V,SL-10-24V
Technology : PMW
Norminal Battery Voltage : Selectable -12,24
Maximum Current Input/Output:10-20amps
Maximum Solar array Capacity :Weight:0.26KG
Read more
Morningstar SS-MPPT-15L
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24V
Maximum Current Output :15amps
Maximum Solar array Capacity :
@12V=200watts,@24V=400watts,
Open Circuit Voltage:75VDC
Status Display:LED
With PV Lighting option
Weight:0.6KG
Read more
Sharp solar Panel 445W nu-jd445
₦227,930.00
Maximum power Pmax 445 Wp Pmax 445wp
Open-circuit voltage Voc 49.04V
Short-circuit current Isc 11.55A
Voltage at point of maximum power Vmpp 41.32
Current at point of maximum power Impp 10.77
Module efficiency nm 20.1%
Datasheet 2102_NUJD_445_HC-Mono_Datasheet_10Y_EN
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A
₦90,258.00
Smart 3- 40A
Chat with us
MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series
MPPT working voltage range=DC60~DC100V
Features:
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently.
3. Maximum PV input voltage up to DC100V.
4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
Out of stock
Canadian Solar – CS3L-375MS
₦212,060.00
Description
Read more
CS3L-375MS
Measurements
Manufacturer warranty
Certificates
IEC 61730 - Safety Qualification
| Nominal power: | 375 W |
| Celltype: | Mono |
| Number of cells: | 120 |
| Module efficiency: | 20,27 % |
| Power Tolerance: | n/a |
| System Voltage: | 1500 V |
| Incl. optimizer: | no |
| Length: | 1.765 mm |
| Width: | 1.048 mm |
| Frame thickness: | 35 mm |
| Frame color: | silver/white |
| Weight: | 21 kg |
| Snow load: | 5.400 Pa |
| Wind load: | 3.600 Pa |
| Pieces per pallet: | 30 |
| Product warranty: | 12 years |
| Power warranty: | 25 years on 0.55% of nominal power |
Reviews
There are no reviews yet.