Outback Power Mate2 Remote
₦130,093.00
The Mate is a complete Outback system control module and display for inverters and FlexMax controllers in any combination. Its display shows operation and allows programming and adjustment of inverter and controller set points. It can be located up to 1,000 feet away from the system and includes an RS232 port for connection to a PC for data logging and system monitoring.
Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Add to cart
CONEXT XW+ POWER DISTBUTION PANEL
₦985,000.00
The XW+ Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support a code- compliant single-inverter installation.
Add to cart
Smart Shunt 2000A/50mV Victron Energy Battery Monitor
The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Read more
MC4 Branch Solar Connector 4 to 1
₦9,300.00
MC4 T 4 in 1 Solafr Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating:Â 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
Schneider Conext SCP: Solar System Control Panel
₦359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
The XW+/SW SCP is a Xanbusâ„¢-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System.
Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor
• Multiple SCP can be used on the same Xanbus network
• Compatible with Conext ComBox
Add to cart
| Weight | 0.9 kg |
|---|---|
| Dimensions | 9.0 × 11.0 × 3.0 in |
Related products
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Solar Charge Controller Wiser2 Dc12v/24V 15A~50A, 50A
Wiser2 DC12V/24V 15A~50A, 50A
Rated current：15A 20A 30A 40A 50A
I-P-Wiser series adopted with auto cool, high conversion efficiency, LCD display and free PC software. It features an efficient MPPT control algorithm to track the maximum power point of the PV array in any environment.
PV Input 150V
Read more
3KW Solar System
8 pcs of 350W monocrystalline panels,
2 sets of foreign mounting rails and accessories,
combined box and
40metres of 6mm flex cable.
Installation and logistics not inclusive
Read more
Xantrex Solar Battery Charger, 40A,12V
TRUECHARGEâ„¢2 Battery Chargers lead the industry with a small footprint and ultra-compact design. Designed for marine and commercial applications worldwide, the new TRUECHARGE2 10-amp charger is the latest addition to the TRUECHARGE2 series. The new...
Read more
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
MC4 Branch Solar Connector 4 to 1
₦9,300.00
MC4 T 4 in 1 Solafr Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating:Â 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
African Energy 200Watt AFR-200 Monocrystalline Solar Panel
₦114,257.00
Voltage at Pmax (Vmp) [V] 37.77 Current at Pmax (Imp) [A] 5.29 Open Circuit Voltage (Voc) [V] 45.25 Short Circuit Current (Isc) [A] 5.92 Power Tolerance +/- 3% (referenced to the Nominal Output) Maximum System...
Add to cart
CONEXT XW+ POWER DISTBUTION PANEL
₦985,000.00
The XW+ Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support a code- compliant single-inverter installation.
Add to cart
Reviews
There are no reviews yet.