Outback Power : FLEXmax 60 FM60
₦392,370.00
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=900watts,@24V=1800watts,
@48V=3600watts,@60V=4500watts
Open Circuit Voltage:150VDC
Status Display:Bulit In
Weight:5.3KG
Weight:6..4KG (Shipping)
Firstoption & 9jasolartech Outback distributor in Nigeria.
Charge Controller
A charge controller’s main function is to optimize a PV array’s output which can fluctuate based on shading and temperature variables found on the average roof.
Charge regulator is basically a voltage and/or current regulator to keep batteries from overcharging. It regulates the voltage and current coming from the solar panels going to the battery.
Outback Power :
The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power.
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
HSBW-60KVA Input Range 304~456V With Digital Meter HSJW60GEWF 60kva Himel
₦1,519,999.00
Himel Voltage Regulator / Stabilizer 60Kva 3ph
Servo Motor
Add to cart
HTND-20kVA Himel Output 230V Digital Meter With 02 Fans 1ph
₦575,999.00
HTND-20kVA (Cabinet)Terminal Output 230V Digital Meter With 02 Fans 140V-250V
Related products
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
SmartSolar MPPT 150/60-Tr
Victron BlueSolar MPPT 150/60-Tr Charge Controller - 60 Amps / 150 Volts 
I-panda Smart MPPT Solar Charge Controller
₦427,996.00
I-P-Smart1-96V Series
MPPT SOLAR CHARGE CONTROLLER DC96V 20A~30A SERIES
I-Panda MPPT Solar Charge Controller 30A, 300V/96V
This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller，making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented, Sealed, Gel, NiCd).
12V/24V/48V/96V system auto recognize for easy control.
12V/24V/48V system maximum solar input is DC 150V ,96V system maximum solar input is DC 300V ;
Add to cart
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Xantrex Solar Charge Controller PMW C60
₦88,013.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Outback Power VFXR3048E – Inverter/Charger
₦1,404,150.00
Outback power system inverters are made in USA. Modular, stackable design; ( you can combine multiple units to achieve higher wattage rating , in single phase or 3phase up to 93% operating efficiency; 7 programmable...
Add to cart
FM80 Solar Charge Controller Outback System
₦502,425.00
FM80 Solar Charge Controler
12/24/36/48/60V @ 80A MPPT
DC Voltage: 12 / 24 / 48 / 60 V
Array Max Power: 1000 / 2000 / 4000 / 5000 W
Max. Open Circuit Voltage: 150 Voc
Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.
Add to cart
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Xantrex Solar Battery Charger, 40A,12V
TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design. Designed for marine and commercial applications worldwide, the new TRUECHARGE2 10-amp charger is the latest addition to the TRUECHARGE2 series. The new...
Read more
Reviews
There are no reviews yet.