Morningstar SS-MPPT-15L
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24V
Maximum Current Output :15amps
Maximum Solar array Capacity :
@12V=200watts,@24V=400watts,
Open Circuit Voltage:75VDC
Status Display:LED
With PV Lighting option
Weight:0.6KG
Morningstar SS-MPPT-15L
Morningstar’s SunSaver MPPT™ solar controller with TrakStar™ Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid PV systems with Up to four programmable timer sequences for pv lighting applications
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
Schneider Flush Switch 16AX 2ways 2gangs KB32
₦3,345.00
Main range Vivace product or component type Switch device short name KB32 device presentation Complete mechanism Complementary switch function 2 way actuator Rocker number of gangs 2 gang colour tint White material Polycarbonate: grid plate...
Add to cart
Himel DC Breaker 32A 2Poles
₦8,875.00
Product Details Brand: Himel Curve Type: CModel: HDB3WZ2C32 Ampere Rating: 32 Number of Poles: 2Poles Voltage Rating: 230VAC/500VAC/500 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Schneider Conext SCP: Solar System Control Panel
₦359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
The XW+/SW SCP is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System.
Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor
• Multiple SCP can be used on the same Xanbus network
• Compatible with Conext ComBox
Add to cart
| Weight | 0.9 kg |
|---|---|
| Dimensions | 9.0 × 11.0 × 3.0 in |
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Related products
Xantrex Solar Charge Controller PMW C40
₦101,733.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Xantrex Solar Charge Controller PMW C60/C40/C35/C12
₦100,622.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Morningstar TS-45
Technology : PMW
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Open Circuit Voltage:125VDC
Status Display:LED with Optional meter
Weight:1.6KG
Read more
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 - 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 - 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
FM100_specsheet
Add to cart
Xantrex Solar Battery Charger, 40A,12V
TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design. Designed for marine and commercial applications worldwide, the new TRUECHARGE2 10-amp charger is the latest addition to the TRUECHARGE2 series. The new...
Read more
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
Outback Power : FLEXmax 60 FM60
₦392,370.00
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=900watts,@24V=1800watts,
@48V=3600watts,@60V=4500watts
Open Circuit Voltage:150VDC
Status Display:Bulit In
Weight:5.3KG
Weight:6..4KG (Shipping)
Firstoption & 9jasolartech Outback distributor in Nigeria.
Add to cart
Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A
₦90,258.00
Smart 3- 40A
Chat with us
MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series
MPPT working voltage range=DC60~DC100V
Features:
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently.
3. Maximum PV input voltage up to DC100V.
4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
Reviews
There are no reviews yet.