Morningstar SL-10L,12V,SL-10-24V
Technology : PMW
Norminal Battery Voltage : Selectable -12,24
Maximum Current Input/Output:10-20amps
Maximum Solar array Capacity :Weight:0.26KG
Morningstar’s SunLight™ solar lighting controller combines the SunSaver design with an advanced microcontroller for automatic lighting control functions.
Four Versions Available:
• 12 Volt: 10 and 20 amp ratings
• 24 Volt: 10 and 20 amp ratings
Sunlight 2V 7 RES OPzV 1090 PB
₦697,938.00
Technical features
Add to cart
| Positive Plates | Tubular |
| Plate Alloy | Lead Calcium Tin |
| Positive Active Mass | Red Lead made from 99.99% Pure Lead |
| Negative Active Mass | Inhouse Production of Lead Oxide |
| Electrolyte | High Purity GEL Form |
| Container | ABS |
| Lid | ABS |
| Separator | Highly Porous Leaf |
| Gauntlet | Wooven |
| Bottom Bar | Ultrasonic Welding |
| Pressure Relief Valve | Integral Flame Arrestor |
| Terminal | Sliding Insulated Pole (M10) |
| Connectors | Insulated Flexible Bolt-on |
| Bolt | Plastic Headed Bolt |
| Cycle Life | up to 3000 Cycles (50% DoD & 20 °C) |
| Operating Temperature | -20 to 45 °C |
Schneider Conext Inverter/Charger XW+8548 -xantrex
₦3,866,999.00Download Datasheet : Schneider Conext XW+8548- XW-230-V Firstoption
Schneider Conext XW+8548 Inverter/Charger 6.8kWOutput 48V 865-8548-61 One solution for grid-tie backup and off-grid solar (230 VAC) Conext XW+ is an adaptable single-phase and three-phase hybrid inverter with grid-tie functionality and dual AC power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further adaptability. FEATURES: Single or three phase systems from 7.0 kW to 102 kW Excellent load starting with high 30-minute and 5-second power Improved battery management including support for Lithium-Ion technology Superior balance of system integration with battery bank, charge controller, and generators, further simplifies installation
Midnite Solar 115V/300V Surge Protector Device MNSPD
The MidNite Solar 115V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for battery circuits.
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
Read more
Related products
Xantrex Solar Charge Controller PMW C40
₦101,733.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Xantrex Solar Charge Controller PMW C60/C40/C35/C12
₦100,622.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A
₦90,258.00
Smart 3- 40A
Chat with us
MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series
MPPT working voltage range=DC60~DC100V
Features:
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently.
3. Maximum PV input voltage up to DC100V.
4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
Xantrex Solar Battery Charger, 40A,12V
TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design. Designed for marine and commercial applications worldwide, the new TRUECHARGE2 10-amp charger is the latest addition to the TRUECHARGE2 series. The new...
Read more
Morningstar TS-MPPT-60
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=800watts,@24V=1600watts,
@48V=3200watts
Open Circuit Voltage:150VDC
Status Display:LED with Optional meter
Weight:4.2KG
Read more
SmartSolar MPPT 150/60-Tr
Victron BlueSolar MPPT 150/60-Tr Charge Controller - 60 Amps / 150 Volts 
Reviews
There are no reviews yet.