MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series – Panel Mount Breakers
100 A
150 VDC
1/4″ stud, 3/4″ wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
150 VDC
1/4″ stud, 3/4″ wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
MC4 Branch Solar Connector 4 to 1
₦9,300.00
MC4 T 4 in 1 Solafr Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating: 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
Xantrex Solar Charge Controller PMW C40
₦101,733.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
12 OPzV-ET 1800 SOLAR 2V Battery
₦518,937.00Eternity 12OPzV-ET1800 Solar Gel 2V Suitable for : Off Grid Solutions ,Telecommunications/ Mobile Phone Stations, Solar/ Wind Power Stations,Solar Power Farm, Data Centres.
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Himel DC Breaker 25A 2Poles
₦8,855.00
Product Details Brand: Himel Curve Type: CModel: HDB3WZ2C25 Ampere Rating: 25 Number of Poles: 2Poles Voltage Rating: 230VAC/500VAC/500 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Related products
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
MN Big Babybox
₦19,375.00
Environmental Rating - Type 1 (Indoor)
Big Baby’s DIN rail accepts up to 4 breakers (not included)
Quad accepts up to 4 panel mount breakers (not included)
Breakers: 1-63A
Max. Wire - breakers 6 AWG
Max. AC Voltage - 277VAC
Max. DC Voltage - 300VDC
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
Add to cart
Schneider Vivace Flush Switch 16AX 1way 1gang KB31_1
₦1,950.00
Main range Vivace product or component type Switch device short name KB31 device presentation Complete mechanism Complementary switch function 1-way actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate: grid plate Polycarbonate:...
Add to cart
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Reviews
There are no reviews yet.