MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series – Panel Mount Breakers
100 A
150 VDC
1/4″ stud, 3/4″ wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
150 VDC
1/4″ stud, 3/4″ wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Himel AC breaker 6A 1P
₦2,120.00
Product details Brand: Himel Curve Type: CModel: HDB3WN1C6 Ampere Rating: 6 Number of Poles: 1 Poles Voltage Rating: 230VAC/400VAC/415 VACInterrupting Capacity: 6kAIC Mounting: Din Rail Type
Add to cart
Beaver Battery Charger 48V 15Amp
₦58,880.00SPECIFICATION
INPUT
Voltage Range:- 165-285VAC Frequency :- 40-70Hz Current:- 8A (Max.) @full loadOUTPUT
Max. Output Current:- 4A ± 8A± 10A± 12A± 15A± 15A± 20A± 0.4A 0.8A 1A 1.2A 1.5A 1.5A 20A Output Voltage 240V 120V 96V 72V 48V 36V 24V Max. Output Char. 960W 960W 960W 960W 720W 540W 480WPHYSICAL
Dimension (DxWxH):- 300x165x95cm Net Weight: 3.6 3.1ENVIRONMENT
Operating Humidity:- 5-95% RH (non-condensing) Operating Temperature:- 0-40°C Noise Level:- Less than 50db (A) @CC model & full load
Sunlight 2V 12 RES OPzV 1875 PB
₦897,400.00
Technical features
Add to cart
| Positive Plates | Tubular |
| Plate Alloy | Lead Calcium Tin |
| Positive Active Mass | Red Lead made from 99.99% Pure Lead |
| Negative Active Mass | Inhouse Production of Lead Oxide |
| Electrolyte | High Purity GEL Form |
| Container | ABS |
| Lid | ABS |
| Separator | Highly Porous Leaf |
| Gauntlet | Wooven |
| Bottom Bar | Ultrasonic Welding |
| Pressure Relief Valve | Integral Flame Arrestor |
| Terminal | Sliding Insulated Pole (M10) |
| Connectors | Insulated Flexible Bolt-on |
| Bolt | Plastic Headed Bolt |
| Cycle Life | up to 3000 Cycles (50% DoD & 20 °C) |
| Operating Temperature | -20 to 45 °C |
Related products
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Interface MK3-USB (VE.BUS to USB)
₦31,000.00
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Add to cart
DC Disconnect 250 Amp DC Battery Breaker
₦110,816.00
Schneider Electric 250 Amp DC Battery Breaker (865-1065)
This circuit breaker is designed to fit the XW power distribution panel and other generic and proprietary enclosure
suitable for other products like
Magnum, Outback
Compatible with :
XW+8548
XW+7048
XW+6048
MS4348 Magnum
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
Reviews
There are no reviews yet.