Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Out of stock
Outback SPCIIM-5000-48 Solar O Grid-Hybrid Inverter
Models: SPCIIM-5000-48 • Pure sine wave inverter • Output Power Factor up to 1 • Output Power up to 5000 Watts • Maximum 9 units in parallel / three phase, configurable • Built-in MPPT up...
Read more
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Related products
Morningstar TS-MPPT-60
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=800watts,@24V=1600watts,
@48V=3200watts
Open Circuit Voltage:150VDC
Status Display:LED with Optional meter
Weight:4.2KG
Read more
Victron Quattro 48/8000/100-100/100 230v VE.Bus Victron Energy
230V VE.Bus compatible with Lithium Ion batteries
Read more
Outback Power VFXR3048E – Inverter/Charger
₦1,404,150.00
Outback power system inverters are made in USA. Modular, stackable design; ( you can combine multiple units to achieve higher wattage rating , in single phase or 3phase up to 93% operating efficiency; 7 programmable...
Add to cart
Xantrex Solar Charge Controller PMW C35
₦113,620.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Conext MPPT 80 Solar PV Charge Controller 865-1032
₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032
600V PV input, 48V battery Input, 80A current.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Solar Charge Controller Wiser2 Dc12v/24V 15A~50A, 50A
Wiser2 DC12V/24V 15A~50A, 50A
Rated current：15A 20A 30A 40A 50A
I-P-Wiser series adopted with auto cool, high conversion efficiency, LCD display and free PC software. It features an efficient MPPT control algorithm to track the maximum power point of the PV array in any environment.
PV Input 150V
Read more
Morningstar SL-10L,12V,SL-10-24V
Technology : PMW
Norminal Battery Voltage : Selectable -12,24
Maximum Current Input/Output:10-20amps
Maximum Solar array Capacity :Weight:0.26KG
Read more
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
Reviews
There are no reviews yet.