Grundfos SQFlex Solar Submersible Pump
Model Number: 25 SQF 3
Centrifugal pump
Supply Voltage: 30-300 VDC or 90-240 VAC at 50/60 Hz
Maximum Gallons per Minute: 40 GPM
Maximum Head: 50 ft.
Discharge: 1.5″ NPT
Weight: 18 pounds
Dimensions: 32″ length and 3.9″ wide
Grundfos SQ-Flex solar pumps will pump water up to 600 foot total head, and can pump up to 85 gallons per minute for shallow wells, depending on model. The helical rotor pumps are what we recommend if you have any dirt, sand, sediment, or high mineral water from your well. The 3 SQF, 6 SQF, and the 11SQF are helical rotor type pumps. All others are centrifugal. All SQF pumps are 17 to 23 pounds in actual weight.
Features and Benefits:
Renewable energy supply: solar panels or wind turbines
Built-in electronics, easy installation
Reliable water supply
Low operating costs
Dry-running protection
Built-in motor protection
High Efficiency
Maximum Power Point Tracking (MPPT)
Wide voltage range
Built-in sand shield
Two-year warranty
Schneider Vivace Telecommunication Data Outlet 2gangs KB32RJ6
₦11,186.00
Main range Vivace device short name KB31 product or component type Data socket with shutter device presentation Complete mechanism cover frame colour tint White Complementary communication network category 6 number of gangs 2 gang tightening...
Add to cart
Morningstar TS-45
Technology : PMW
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Open Circuit Voltage:125VDC
Status Display:LED with Optional meter
Weight:1.6KG
Read more
Schneider Vivace Flush Switch 10A Bell Press with Bell Icon KB31BPB
₦2,710.00
Main range Vivace product or component type Switch device short name KB31bpb device application Control device presentation Complete mechanism Complementary switch function Bell actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate:...
Add to cart
Related products
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
MC4 Branch Solar Connector 3 to 1
₦6,540.00
MC4 T 3 in 1 Solar Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating: 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
Morningstar SL-10L,12V,SL-10-24V
Technology : PMW
Norminal Battery Voltage : Selectable -12,24
Maximum Current Input/Output:10-20amps
Maximum Solar array Capacity :Weight:0.26KG
Read more
Out of stock
Canadian Solar – CS3L-375MS
₦212,060.00
Description
Read more
CS3L-375MS
Measurements
Manufacturer warranty
Certificates
IEC 61730 - Safety Qualification
| Nominal power: | 375 W |
| Celltype: | Mono |
| Number of cells: | 120 |
| Module efficiency: | 20,27 % |
| Power Tolerance: | n/a |
| System Voltage: | 1500 V |
| Incl. optimizer: | no |
| Length: | 1.765 mm |
| Width: | 1.048 mm |
| Frame thickness: | 35 mm |
| Frame color: | silver/white |
| Weight: | 21 kg |
| Snow load: | 5.400 Pa |
| Wind load: | 3.600 Pa |
| Pieces per pallet: | 30 |
| Product warranty: | 12 years |
| Power warranty: | 25 years on 0.55% of nominal power |
Sharp solar Panel 445W nu-jd445
₦227,930.00
Maximum power Pmax 445 Wp Pmax 445wp
Open-circuit voltage Voc 49.04V
Short-circuit current Isc 11.55A
Voltage at point of maximum power Vmpp 41.32
Current at point of maximum power Impp 10.77
Module efficiency nm 20.1%
Datasheet 2102_NUJD_445_HC-Mono_Datasheet_10Y_EN
Add to cart
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Schneider Conext Combox Monitoring System
₦283,676.00
Schneider Conext Combox Monitoring System 865-1058
Advanced diagnostics for solar and battery systems
The Conext™ ComBox is a powerful communications and monitoring device for installers and operators of Conext solar systems. It features an integrated web server, enabling graphical displays of system daily, monthly and lifetime energy data to be viewed using a simple web browser or Android™ tablet device.
• Monitor solar system harvest and yield anytime, anywhere
• Measure and compare energy performance over varying timelines
• Receive email alerts and reduce system downtime
Add to cart
Conext MPPT 80 Solar PV Charge Controller 865-1032
₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032
600V PV input, 48V battery Input, 80A current.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Reviews
There are no reviews yet.