Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
EPSolar PWM Landstar Series
New LandStar series is Epsolar’s new generation programmable solar charge controller. Fully encapsulated PCB, IP67 design, aluminum case ensures the controller can work in extremely terrible, and increase system operation, reliability and efficiency.
LS1024BP/ LS2024BP
Out of stock
Ritar Deep Cycle Battery 200ah 12V
₦228,160.00
200Ah/12V@10HR AGM Deep Cycle Battery Sealed Maintenance-free Long cycle life Applications: Inverter, UPS, Solar, Telecom, CCTV power backup FASTER RECHARGE : Patented “Instacharge”, paste recipe for excellent charge acceptance HIGHLY RELIABLE : Comes out of...
Read more
Out of stock
Outback SPCIIM-5000-48 Solar O Grid-Hybrid Inverter
Models: SPCIIM-5000-48 • Pure sine wave inverter • Output Power Factor up to 1 • Output Power up to 5000 Watts • Maximum 9 units in parallel / three phase, configurable • Built-in MPPT up...
Read more
Pylontech UP5000
The Pylontech UP5000 lithium battery is a mid-range 48V battery that is ideal for daily cycling applications with a lifetime of over 4,500 cycles at a 95% depth of discharge. This battery also suits larger domestic applications as you can parallel up to 16 units for up to 72.96kWh of high-performance energy storage.
This reliable solar storage solution comes with a 7-year warranty. However, its ultra-reliable performance and superior low failure rate mean it should last over 10 years.
Key Features:
Read more
- Modular design for ease of expansion
- Higher usable capacity resulting in fewer battery modules installed
- Usable capacity up to 4,560Wh
- Parallel Capability of up to 16 units
- Allows for large installation of up to 72.96kWh with no LV Hub
- Intelligent BMS protecting battery cells
- 95% DoD with more usable capacity
- RS485 and CAN compatible
Xantrex Solar Charge Controller PMW C60/C40/C35/C12
₦100,622.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Smart Shunt 2000A/50mV Victron Energy Battery Monitor
The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Read more
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
Related products
Conext MPPT 80 Solar PV Charge Controller 865-1032
₦1,561,699.00
Conext MPPT 80 Solar PV Charge Controller 865-1032
600V PV input, 48V battery Input, 80A current.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
Add to cart
FM80 Solar Charge Controller Outback System
₦502,425.00
FM80 Solar Charge Controler
12/24/36/48/60V @ 80A MPPT
DC Voltage: 12 / 24 / 48 / 60 V
Array Max Power: 1000 / 2000 / 4000 / 5000 W
Max. Open Circuit Voltage: 150 Voc
Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.
Add to cart
CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart
Xantrex Solar Charge Controller PMW C60
₦88,013.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Outback Power : FLEXmax 60 FM60
₦392,370.00
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=900watts,@24V=1800watts,
@48V=3600watts,@60V=4500watts
Open Circuit Voltage:150VDC
Status Display:Bulit In
Weight:5.3KG
Weight:6..4KG (Shipping)
Firstoption & 9jasolartech Outback distributor in Nigeria.
Add to cart
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Outback Power VFXR3048E – Inverter/Charger
₦1,404,150.00
Outback power system inverters are made in USA. Modular, stackable design; ( you can combine multiple units to achieve higher wattage rating , in single phase or 3phase up to 93% operating efficiency; 7 programmable...
Add to cart
Magnum PT-100 MPPT Solar Charge Controller
Maximum Power Point Tracking technology for increased PV power output efficiency.
• Continuous charging current up to 100ADC and high input voltage up to 240VDC (Voc).
• Compatible with 12, 24 or 48V battery systems with automatic detection of system voltage
Single controller supports large PV array up to 6600W.
• Peak conversion efficiency is higher than 99% (PV In to DC Out).
Read more
SmartSolar MPPT 150/70-Tr VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Reviews
There are no reviews yet.