Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
EPSolar PWM Landstar Series
New LandStar series is Epsolar’s new generation programmable solar charge controller. Fully encapsulated PCB, IP67 design, aluminum case ensures the controller can work in extremely terrible, and increase system operation, reliability and efficiency.
LS1024BP/ LS2024BP
Midnite Solar 115V/300V Surge Protector Device MNSPD
The MidNite Solar 115V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for battery circuits.
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
Read more
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Lithium Battery 200A (AKKUTECH)
Nominal Voltage-51.2V
charge mode 0.2c to 56V
Charge Current -40A
Max Charge Current=65A
Minimum discharge Voltage-44V
Weight=104kg
Dimension -520mmX442mmX223mm
Design Life-10 years
Cycle -4,000 80% DOD
AT-SPEC-LiFePO4 Battery 51.2V-10.24kWh-L
Read more
12 OPzV-ET 1800 SOLAR 2V Battery
₦518,937.00Eternity 12OPzV-ET1800 Solar Gel 2V Suitable for : Off Grid Solutions ,Telecommunications/ Mobile Phone Stations, Solar/ Wind Power Stations,Solar Power Farm, Data Centres.
Sunlight 2V 7 RES OPzV 1090 PB
₦697,938.00
Technical features
Add to cart
| Positive Plates | Tubular |
| Plate Alloy | Lead Calcium Tin |
| Positive Active Mass | Red Lead made from 99.99% Pure Lead |
| Negative Active Mass | Inhouse Production of Lead Oxide |
| Electrolyte | High Purity GEL Form |
| Container | ABS |
| Lid | ABS |
| Separator | Highly Porous Leaf |
| Gauntlet | Wooven |
| Bottom Bar | Ultrasonic Welding |
| Pressure Relief Valve | Integral Flame Arrestor |
| Terminal | Sliding Insulated Pole (M10) |
| Connectors | Insulated Flexible Bolt-on |
| Bolt | Plastic Headed Bolt |
| Cycle Life | up to 3000 Cycles (50% DoD & 20 °C) |
| Operating Temperature | -20 to 45 °C |
Related products
Morningstar SS-MPPT-15L
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24V
Maximum Current Output :15amps
Maximum Solar array Capacity :
@12V=200watts,@24V=400watts,
Open Circuit Voltage:75VDC
Status Display:LED
With PV Lighting option
Weight:0.6KG
Read more
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
Solar Controller MPPT I-P-Esmart3-12v/24v/36v/48v-Series 40A
₦90,258.00
Smart 3- 40A
Chat with us
MPPT solar controller modes: I-P-eSMART-12V/24V/36V/48V-series
MPPT working voltage range=DC60~DC100V
Features:
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/36V/48V battery system automatic recognition, users can use it in different system conveniently.
3. Maximum PV input voltage up to DC100V.
4. Three stages charge: fast charge(MPPT), constant voltage charge,floating charge, It can protect batteries well .
Add to cart
SmartSolar MPPT 150/70-Tr VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Read more
FM80 Solar Charge Controller Outback System
₦502,425.00
FM80 Solar Charge Controler
12/24/36/48/60V @ 80A MPPT
DC Voltage: 12 / 24 / 48 / 60 V
Array Max Power: 1000 / 2000 / 4000 / 5000 W
Max. Open Circuit Voltage: 150 Voc
Manufactured by Alpha Outback System, sold by Firstoption and 9jasoartech.
Add to cart
I-panda Smart MPPT Solar Charge Controller
₦427,996.00
I-P-Smart1-96V Series
MPPT SOLAR CHARGE CONTROLLER DC96V 20A~30A SERIES
I-Panda MPPT Solar Charge Controller 30A, 300V/96V
This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller，making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented, Sealed, Gel, NiCd).
12V/24V/48V/96V system auto recognize for easy control.
12V/24V/48V system maximum solar input is DC 150V ,96V system maximum solar input is DC 300V ;
Add to cart
Outback Power : FLEXmax 60 FM60
₦392,370.00
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V,60V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=900watts,@24V=1800watts,
@48V=3600watts,@60V=4500watts
Open Circuit Voltage:150VDC
Status Display:Bulit In
Weight:5.3KG
Weight:6..4KG (Shipping)
Firstoption & 9jasolartech Outback distributor in Nigeria.
Add to cart
Morningstar TS-MPPT-60
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=800watts,@24V=1600watts,
@48V=3200watts
Open Circuit Voltage:150VDC
Status Display:LED with Optional meter
Weight:4.2KG
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
Morningstar TS-45
Technology : PMW
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Open Circuit Voltage:125VDC
Status Display:LED with Optional meter
Weight:1.6KG
Read more
Reviews
There are no reviews yet.