CONEXT XW+ POWER DISTBUTION PANEL
₦985,000.00
The XW+ Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support a code- compliant single-inverter installation.
CONEXT XW+ POWER DISTBUTION PANEL
| Weight | 35.0 lbs |
|---|---|
| Dimensions | 21.0 × 13.5 × 35.0 in |
The XW+ Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support a code- compliant single-inverter installation.
It has plenty of room to add wiring and breakers to expand the XW+ System with up to three inverters, four charge controllers, or other equipment to support 120/240-volt, three-wire, single-phase systems.
With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.
The XW+ Power Distribution Panel (XW+ PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW+ Conduit Box is supplied with each XW+ PDP.
CCGX WIFI module simple (nano USB) Victron Energy
₦26,737.00
CCGX WiFi module simple (Nano USB), small, low cost. Victron part number BPP900100200
Add to cart
Xantrex Solar Charge Controller PMW C60
₦88,013.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Smart Shunt 2000A/50mV Victron Energy Battery Monitor
The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Read more
Out of stock
Phocos PSW-H-5kW-230/48V Any-Grid Hybrid Inverter Charger
Any-Grid™ Hybrid Inverter Charger The Phocos Any-Grid Inverter Charger Series (Pure Sine Wave Hybrid) represents Phocos’ most versatile line of inverters/chargers. Flexibility and reliability are key characteristics of this product line, with a strong potential...
Read more
Morningstar SL-10L,12V,SL-10-24V
Technology : PMW
Norminal Battery Voltage : Selectable -12,24
Maximum Current Input/Output:10-20amps
Maximum Solar array Capacity :Weight:0.26KG
Read more
Related products
I-panda Smart MPPT Solar Charge Controller
₦427,996.00
I-P-Smart1-96V Series
MPPT SOLAR CHARGE CONTROLLER DC96V 20A~30A SERIES
I-Panda MPPT Solar Charge Controller 30A, 300V/96V
This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller，making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented, Sealed, Gel, NiCd).
12V/24V/48V/96V system auto recognize for easy control.
12V/24V/48V system maximum solar input is DC 150V ,96V system maximum solar input is DC 300V ;
Add to cart
Out of stock
MPPT Solar Charge Controller 96v/60A (SAKO)
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
MC4 Branch Solar Connector 4 to 1
₦9,300.00
MC4 T 4 in 1 Solafr Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating:Â 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
African Energy 200Watt AFR-200 Monocrystalline Solar Panel
₦114,257.00
Voltage at Pmax (Vmp) [V] 37.77 Current at Pmax (Imp) [A] 5.29 Open Circuit Voltage (Voc) [V] 45.25 Short Circuit Current (Isc) [A] 5.92 Power Tolerance +/- 3% (referenced to the Nominal Output) Maximum System...
Add to cart
Schneider Conext Combox Monitoring System
₦283,676.00
Schneider Conext Combox Monitoring System 865-1058
Advanced diagnostics for solar and battery systems
The Conextâ„¢ ComBox is a powerful communications and monitoring device for installers and operators of Conext solar systems. It features an integrated web server, enabling graphical displays of system daily, monthly and lifetime energy data to be viewed using a simple web browser or Androidâ„¢ tablet device.
• Monitor solar system harvest and yield anytime, anywhere
• Measure and compare energy performance over varying timelines
• Receive email alerts and reduce system downtime
Add to cart
Outback Power Mate2 Remote
₦130,093.00
The Mate is a complete Outback system control module and display for inverters and FlexMax controllers in any combination. Its display shows operation and allows programming and adjustment of inverter and controller set points. It can be located up to 1,000 feet away from the system and includes an RS232 port for connection to a PC for data logging and system monitoring.
Add to cart
SW Universal DC Breaker Panel
₦203,455.00
The universal DC Breaker Panel is pre-wired for quick installation with a single Conext SW
Add to cart
Solar Light Sunking Home 120
₦59,500.00Sunking Home 120
DESIGNED FOR HOMES, AND SMALL BUSINESSES AS AN ALTERNATIVE TO GRID POWER Home 120 comes with 3 super bright lamps to light up your entire home
SW AC Breaker Panel 230
₦305,000.00
The ConextTM SW Power Distribution Panels are pre-wired out of the box and labeled to support the integration of Conext SW inverter/chargers with a Conext MPPT Solar Charge Controller, battery bank and load centers.
Add to cart
Reviews
There are no reviews yet.