CONEXT XW+ CONNECTION KIT FOR V2 INV3
₦723,839.00
An overall kit for INV3
CONEXT XW+ CONNECTION KIT FOR V2 INV3
- Model: RNW865102002
- GTIN: 00785901507123
- Manufactured by: Schneider Electric
- Conduit Box for attaching to the bottom of second or third Conext XW+ inverter/charger.
- 2 x #4/0 AWG (107 mm) DC battery cables for connecting second or third inverter/chargers to the Power Distribution Panel (PDP)
- Bushings for AC wiring knockouts, AC Sync and Xanbus knockouts
- 5 x #6 AWG (13.3 mm) cables for GRID, LOAD and Neutral AC connections (labelled)
- DC positive bus bar for up to 3 DC disconnect breakers. Replaces factory-installed bus bar.
- 1 x #2 AWG (33.6 mm) cable for grounding (labelled)
- GJ 250 Amp 160 VDC circuit breaker
- AC Sync and Xanbus cables for network communication
- Plastic cable ties
- Product Manual
HSBW-60KVA Input Range 304~456V With Digital Meter HSJW60GEWF 60kva Himel
₦1,519,999.00
Himel Voltage Regulator / Stabilizer 60Kva 3ph
Servo Motor
Add to cart
Schneider Vivace Flush Switch 10A Way Centre Off Retractive Switch KB31BP_2
₦4,710.00
Main range Vivace product or component type Switch device short name KB31bp_2 device application Control device presentation Complete mechanism Complementary switch function Retractive actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate:...
Add to cart
MC4 Branch Solar Connector 4 to 1
₦9,300.00
MC4 T 4 in 1 Solafr Branch Connector in pair for making parallel solar panel connection.
Add to cart
- Voltage rating: 600VDC
- Nominal current rating: 20A
- Cable fitment: 2.5, 4 & 6mm²
Xantrex Solar Charge Controller PMW C40
₦101,733.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Mnedc 175A DC Battery Breaker
₦76,812.00
MNEDC 175A DC Battery Breaker 125VDC
Made by Midnite USA
MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
Compatible with
SW4048
MS4338PE
VFXR3048E
Add to cart
Related products
DC Disconnect 250 Amp DC Battery Breaker
₦110,816.00
Schneider Electric 250 Amp DC Battery Breaker (865-1065)
This circuit breaker is designed to fit the XW power distribution panel and other generic and proprietary enclosure
suitable for other products like
Magnum, Outback
Compatible with :
XW+8548
XW+7048
XW+6048
MS4348 Magnum
Add to cart
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
Interface MK3-USB (VE.BUS to USB)
₦31,000.00
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Add to cart
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
MN Big Babybox
₦19,375.00
Environmental Rating - Type 1 (Indoor)
Big Baby’s DIN rail accepts up to 4 breakers (not included)
Quad accepts up to 4 panel mount breakers (not included)
Breakers: 1-63A
Max. Wire - breakers 6 AWG
Max. AC Voltage - 277VAC
Max. DC Voltage - 300VDC
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
Add to cart
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Add to cart
Reviews
There are no reviews yet.