CONEXT XW+ CONNECTION KIT FOR V2 INV3
₦723,839.00
An overall kit for INV3
CONEXT XW+ CONNECTION KIT FOR V2 INV3
- Model: RNW865102002
- GTIN: 00785901507123
- Manufactured by: Schneider Electric
- Conduit Box for attaching to the bottom of second or third Conext XW+ inverter/charger.
- 2 x #4/0 AWG (107 mm) DC battery cables for connecting second or third inverter/chargers to the Power Distribution Panel (PDP)
- Bushings for AC wiring knockouts, AC Sync and Xanbus knockouts
- 5 x #6 AWG (13.3 mm) cables for GRID, LOAD and Neutral AC connections (labelled)
- DC positive bus bar for up to 3 DC disconnect breakers. Replaces factory-installed bus bar.
- 1 x #2 AWG (33.6 mm) cable for grounding (labelled)
- GJ 250 Amp 160 VDC circuit breaker
- AC Sync and Xanbus cables for network communication
- Plastic cable ties
- Product Manual
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
Schneider Vivace Blank Plate 1gang KB30
₦1,470.00
Main product or component type Cover frame device short name KB30 Complementary number of gangs 1 gang Colour tint White material Polycarbonate: grid plate Polycarbonate: surround projecting depth 8 mm device mounting Flush width 86 mm height...
Add to cart
Solar Light Sunking Home 120
₦59,500.00Sunking Home 120
DESIGNED FOR HOMES, AND SMALL BUSINESSES AS AN ALTERNATIVE TO GRID POWER Home 120 comes with 3 super bright lamps to light up your entire home
Schneider Vivace Switched Socket with Neon 13A 1way 1gang KB15N
₦3,729.00
Main range Vivace product or component type Switched socket device short name KB15N device presentation Complete product Complementary pilot light Red neon indicator outlet poles configuration 2P + E number of gangs 1 gang Colour...
Add to cart
Interface MK3-USB (VE.BUS to USB)
₦31,000.00
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Add to cart
Related products
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Add to cart
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series - Panel Mount Breakers
100 A
150 VDC
1/4" stud, 3/4" wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Add to cart
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
Outback Power Systems MATE3s Remote
₦484,250.00
Program, manage and monitor entire system
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions.
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
Reviews
There are no reviews yet.