CONEXT XW+ CONNECTION KIT FOR V2 INV3
₦723,839.00
An overall kit for INV3
CONEXT XW+ CONNECTION KIT FOR V2 INV3
- Model: RNW865102002
- GTIN: 00785901507123
- Manufactured by: Schneider Electric
- Conduit Box for attaching to the bottom of second or third Conext XW+ inverter/charger.
- 2 x #4/0 AWG (107 mm) DC battery cables for connecting second or third inverter/chargers to the Power Distribution Panel (PDP)
- Bushings for AC wiring knockouts, AC Sync and Xanbus knockouts
- 5 x #6 AWG (13.3 mm) cables for GRID, LOAD and Neutral AC connections (labelled)
- DC positive bus bar for up to 3 DC disconnect breakers. Replaces factory-installed bus bar.
- 1 x #2 AWG (33.6 mm) cable for grounding (labelled)
- GJ 250 Amp 160 VDC circuit breaker
- AC Sync and Xanbus cables for network communication
- Plastic cable ties
- Product Manual
Schneider Conext Solar Charge Controller 60A- 150Vdc
₦921,990.00
Mechanical Data
Technology: Maximum Power Point Tracking (MPPT)
Dimensions:
14.50 x 5.75 x 5.50 inches
Weight: 10.75 lbs
Enclosure Type: Ventilated
Enclosure Material: Sheet Metal Chassis
Device Mounting: Vertical Wall Mount - Indoor Only
Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink
Recommended Wire Size: #6 AWG to #14 AWG
Total Power Consumption: 2.5W (Tare)
Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption)
Operating Temperature Range: -20 to +45°C
Add to cart
Led Motion Bulb E27 12W
₦5,175.00
Led Motion bulb e27 screw bulb, cold white automatic on and off
Schneider Vivace Flush Switch 10A Way Centre Off Retractive Switch KB31BP_2
₦4,710.00
Main range Vivace product or component type Switch device short name KB31bp_2 device application Control device presentation Complete mechanism Complementary switch function Retractive actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate:...
Add to cart
Beaver Mini Battery Switch/Disconnect On-Off 12-48V
₦29,095.00
Battery Switch or battery Disconnect, battery isolator suitable for most residential inverter installation where safety is required.
Add to cart
OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 - 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 - 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
FM100_specsheet
Add to cart
Related products
XW+ CONFIGURATION TOOL
₦637,288.00
The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time.
Add to cart
VE.Direct cable 1.8 m (one side right angle conn) Victron Energy
₦11,701.00Victron Energy VE.Direct Cable 18m (one side Right Angle conn) – ASS030531218
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
MN Big Babybox
₦19,375.00
Environmental Rating - Type 1 (Indoor)
Big Baby’s DIN rail accepts up to 4 breakers (not included)
Quad accepts up to 4 panel mount breakers (not included)
Breakers: 1-63A
Max. Wire - breakers 6 AWG
Max. AC Voltage - 277VAC
Max. DC Voltage - 300VDC
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
Add to cart
SW AC Breakers KIT for Stacked 230VAC System
₦183,000.00
The Conext SW 230V AC Stacking Kit contains AC circuit breakers and parts for connecting an additional Conext SW inverter/charger
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
Solar Mounting Frame and Accessories
₦40,365.00
4.2m rail 2pcs
Lfoot 6pcs
Mid Clamp 6pcs
End Clamp 6pcs
Add to cart
Reviews
There are no reviews yet.