Conext Auto Generator Start for XW+/ SW Schneider
₦200,251.00
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads.
Conext Auto Generator Start for XW+/ SW
| Weight | 0.9 kg |
|---|---|
| Dimensions | 6.0 × 2.0 × 4.0 in |
The XW+ AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads. It does this by continuously monitoring the battery voltage, state-of-charge, or the inverter charge mode, starting and stopping the generator when the battery needs additional charging.
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
MN Big Babybox
₦19,375.00
Environmental Rating - Type 1 (Indoor)
Big Baby’s DIN rail accepts up to 4 breakers (not included)
Quad accepts up to 4 panel mount breakers (not included)
Breakers: 1-63A
Max. Wire - breakers 6 AWG
Max. AC Voltage - 277VAC
Max. DC Voltage - 300VDC
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
Add to cart
Xantrex Solar Charge Controller PMW C60
₦88,013.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Sunlight 2V 5 RES OPzV 780 PB
₦568,000.00
Technical features
Add to cart
| Positive Plates | Tubular |
| Plate Alloy | Lead Calcium Tin |
| Positive Active Mass | Red Lead made from 99.99% Pure Lead |
| Negative Active Mass | Inhouse Production of Lead Oxide |
| Electrolyte | High Purity GEL Form |
| Container | ABS |
| Lid | ABS |
| Separator | Highly Porous Leaf |
| Gauntlet | Wooven |
| Bottom Bar | Ultrasonic Welding |
| Pressure Relief Valve | Integral Flame Arrestor |
| Terminal | Sliding Insulated Pole (M10) |
| Connectors | Insulated Flexible Bolt-on |
| Bolt | Plastic Headed Bolt |
| Cycle Life | up to 3000 Cycles (50% DoD & 20 °C) |
| Operating Temperature | -20 to 45 °C |
SmartSolar MPPT 250/100-Tr VE.Can
Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller up to 48VDC at 100 Amps
Related products
Schneider Conext XW+7048 Inverter/Charger – xantrex
₦3,823,999.00
Schneider Conext XW+7048 Inverter/Charger 5.5kw output 48V Conext XW+ with a 5.5kw continuous output The next generation of the highly successful Conext XW hybrid inverter. Featuring higher power ratings, Conext XW+ also has better battery management, including support for lithium-ion technology.
Add to cart
MidNite Solar MNEDC100
₦19,375.00
MidNite Solar MNEDC Series - Panel Mount Breakers
100 A
150 VDC
1/4" stud, 3/4" wide
Technical Specifications
DC Voltage: 150Volts
Max. Current: 100A
Breaker Type: Panel mount
Num. of Poles: 1poles
Add to cart
Schneider Xantrex Inverter/Charger Xantrex XW4548E Replaced with 7048
₦2,640,625.00
Schneider Xantrex Inverter/Charger Xantrex XW4548E 4.5kw 230V
Provides output power of 4500 W AC at 240V
True sine wave provides clean output for sensitive electronics
Wall mount is ideal for wiring purposes
he Xantrex XW4548 by Schneider Electric is a hybrid Inverter with built-in charger. It will accept 44V DC to 64V DC from a solar array for charging batteries. It also accepts 120VAC and 240VAC for the charging circuit.
Add to cart
XW-CONDUIT BOX Schneider Conext
₦158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart
solar mounting rail 2.5m
₦44,562.00
Photovoltaic mounting systems (also called solar module racking) are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as...
Add to cart
Hub 4 Outback Port Communication Manager Outback power system
₦139,657.00
Varanise CN Tee NOK 449, Hilfiger Denim - NELLY.COM. Marfa authentic High Life veniam. Tumblr poThe HUB-4 communication manager allows the MATE to control and monitor a maximum of four OutBack products
Add to cart
Victron MultiPlus-II 24/3000/70-32 Victron
The new Victron MultiPlus-II 24/3000/70-32 230V is the first 24 volt model of the new generation MultiPlus-II inverter/charger range
Read more
CONEXT BATTERY FUSE DISCONNECT BOX WITH 250A
₦367,000.00
The ConextTM Battery Fuse Combiner Box 250 combines up to three Conext XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries and inverter/chargers.
Add to cart
Reviews
There are no reviews yet.