CM/R-50 Xantrex Remote Display for Solar Charge Controller
₦55,272.00
Remote Display for C35,C40,C60,15mcable
CM/R-50 Xantrex Remote Display For Solar Charge Controller
Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Lithium Battery 200A (AKKUTECH)
Nominal Voltage-51.2V
charge mode 0.2c to 56V
Charge Current -40A
Max Charge Current=65A
Minimum discharge Voltage-44V
Weight=104kg
Dimension -520mmX442mmX223mm
Design Life-10 years
Cycle -4,000 80% DOD
AT-SPEC-LiFePO4 Battery 51.2V-10.24kWh-L
Read more
HSJW45GEO400WF HSJW-45KVA I/270-430V O/400V Digital Meter With Fans Himel
₦1,193,999.00
HSJW45GEO400WF HSJW-45KVA I/270-430V O/400V Digital Meter With Fans Himel
Himel Voltage Regulator / Stabilizer 60Kva 3ph
Servo Motor
Add to cart
MidNite Solar MNDC250
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included.
The panel mount plates allow for mounting the ¾” 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure.
Another configuration would be one MNDC-GFP, one ¾” panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker.
Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.
Read more
Outback Power Mate2 Remote
₦130,093.00
The Mate is a complete Outback system control module and display for inverters and FlexMax controllers in any combination. Its display shows operation and allows programming and adjustment of inverter and controller set points. It can be located up to 1,000 feet away from the system and includes an RS232 port for connection to a PC for data logging and system monitoring.
Add to cart
Related products
Morningstar TS-MPPT-60
Technology : MPPT
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Maximum Solar array Capacity :
@12V=800watts,@24V=1600watts,
@48V=3200watts
Open Circuit Voltage:150VDC
Status Display:LED with Optional meter
Weight:4.2KG
Read more
Solar Charge Controller ET6415BND Epsolar Etracer MPPT Solar
12/24/36/48V auto work
Advanced MPPT technology
Several seconds tracking speed
High Tracking efficiency of 99%
Peak conversion efficiency of 98%
New 60A eTracer ET6415BND MPPT Solar Charge Controller, 60amps 12V 24V 36V 48V EP Solar Battery Charge Controller Regulators
Read more
Epsolar Landstar LS2024BP
Product features
1.Increases PV Array Output by up to 30%
2.Advanced Continuous Maximum Power Point Tracking
3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable
support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
Read more
Morningstar TS-45
Technology : PMW
Norminal Battery Voltage :
Selectable -12,24,36,48V
Maximum Current Output :60amps
Open Circuit Voltage:125VDC
Status Display:LED with Optional meter
Weight:1.6KG
Read more
Xantrex Solar Charge Controller PMW C60/C40/C35/C12
₦100,622.00
C60=49,507.84 With display Meter=N75,835.84
C40=45,491.19 with display Meter=N71,819.19
C35=34,044.49 With display Meter=N60,372
Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation.
C12-12V
C35-12V/24V (55 VDC)
C40-12V/24V/48V (125 VDC)
C60-12V/24V (55 VDC)
with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart
Outback Radian 7Kw 48V Off-Grid Inverter GS7048E
₦4,523,082.00
Outback Radiant GE7048E
230V
56.7kg
radianseries_7048e_3548e_specsheet
Add to cart
radianseries_7048e_3548e_specsheet
SmartSolar MPPT 150/70-Tr VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Read more
Out of stock
Sako MPPT Solar Charge Controller 72V/30A
MAIN FUNCTION
- full Multi-function LCD Display, easier to check
- Rich operation information shows that PV voltage, current and cumulative power generation
- battery charging voltage are adjustable
- parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
- various status indications
- with the over-charge, over-load, short circuit and Anti-reverse protection
SmartSolar Pluggable Display Victron Energy
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Read more
OutBack Power FM100-300VDC FLEXmax 100A MPPT Solar Charge Controller
₦1,169,090.00
FM100-300VDC-AFCI Specifications:
Nominal battery system voltage: 24, 36, & 48 Volts DC
Charging range output: 20 - 68 Volts DC
Controller type: MPPT
Minimum battery bank size: 100 Amp-hours
Maximum continuous output current: 100 Amps
Maximum input current: 64 Amps
Maximum array power (24V / 36V / 48V): 3500 / 5250 / 7000 Watts
Maximum PV system voltage: 300 Volts DC
Operating input voltage range: 30 - 290 Volts DC
Peak efficiency: 98.8% at 48VDC
Remote display & controller: MATE3s compatible (purchased separately)
Data logging: 128 days
Enclosure protection rating: IP54
Weight: 19.75 pounds (8.9 kg)
Dimensions (H x W x D): 23.0 x 8.8 x 6.0 inches
Certifications: UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
FM100_specsheet
Add to cart
Reviews
There are no reviews yet.