Sunbird off grid bi directional solar inverter 250Kva 600V Online Solar  Hybrid system is the new generation inverter, which has been designed specially for the solar application, made by FujiElectric Consul Neowatt (Japan/Indian Collaboration).

Suitable for mini grid inverter, Medical inverter, datacenter inverter,Residential backup Inverter,Library system Inverter.

SUNBIRD 3000 is Three phase output, industrial grade Inverter system. The Inverter module can operate in parallel with AC input source.

In normal mode, Inverter operates from battery or array power source and produces 3 phase conditioned AC output to cater the load requirement.

 

Suitable for :

  • mini grid inverter
  • Medical inverter
  • datacenter inverter
  • Residential backup Inverter
  • Library system Inverter
  • Petrol & Gas station
  • Factory
  • Water Pumping & Circulation
  • Military and Security application
  • CCTV Camera Backup

MPPT

MPPT Voltage-330-480V

Mppt Maximum Input Current (A)-105A

No. of charge controller-1

Charging Current(Max) from PV in Amp-111A

Grid

3ph

Nominal Voltage & Voltage Range-3Phase 4 Wire / 415VAC(+10%, -15%), 50Hz

Charging Current(Max) from Grid in Amp-55A

Battery

Battery Voltage-240V

Battery Type-SMF/VRLA/Wet Lead Acid/ TGel

Output Waveform-sine wave

Nominal Output Current (A)-415VAC L-L (240VAC L-N) / (Pure Sine Wave)

Overload at nominal output voltage for 10 minutes-125%

Overload at nominal output voltage for 1 minutes-150%

Inverter peak efficiency-Up to 92%

Galvanic Isolation-Inbuilt isolation transformer at inverter output

Special Features

Special Features

Multiple 32 bit DSP controllers Space Vector Modulation Battery less operation

High efficiency

True Bi-directional Solar Inverter

Higher Array voltage capacity optionally available

Inbuilt charge controller

MPPT – Achieved through Incremental Conductance Algorithms

Modular construction gives higher MTTR Battery charging through Grid up to 100% Selectable source feature – Grid / Battery

DC fan for low power consumption

Inbuilt isolation transformer for galvanic isolation 128 x 64 Graphics display

PF correction while on mains / Grid supply (Line interactive) Variable fan speed – for increased reliability, results into

lesser dust suction inside the cabinet

The built in solar charge controller can accommodate up to 11kw of solar panel

MPPT based array charger, supplies the DC power for battery charging as well as for the inverter.

In case batteries are going in to discharge mode due to array unhealthy, Grid input source will get triggered automatically at certain predetermined battery voltage level and operate in parallel with the inverter. Grid Input source starts battery charging as well as takes care of output load and after sufficient battery charge level, it will automatically isolates from the inverter.

Sunbird 3000 Solar inverter has many unparallel features, which gives best ROI for the user and helps in bringing the dream of Green planet more closer. The 30Kva is suitable for medical application and production line  due to 0 switching time.

 

CHASSIS DIMENSION (WXDXH) 600 x 800 x 1200 IP20

Storage -Operating Temperature–20 °C – 70°C

Operating Temperature-Inverter : 0-40 °C,

SMF battery : 25 to 27 Deg C

Weight 1960 kg
Dimensions 1850 × 1200 × 2020 cm

Reviews

There are no reviews yet.

Be the first to review “250Kva 600V Online Hybrid Inverter With Mppt Solar Charge Controller”

Your email address will not be published. Required fields are marked

SW AC Breaker Panel 230

305,000.00
The ConextTM SW Power Distribution Panels are pre-wired out of the box and labeled to support the integration of Conext SW inverter/chargers with a Conext MPPT Solar Charge Controller, battery bank and load centers.
Add to cart

Xantrex Solar Charge Controller PMW C40

101,733.00
C60=49,507.84 With display Meter=N75,835.84 C40=45,491.19 with display Meter=N71,819.19 C35=34,044.49 With display Meter=N60,372 Schneider Electric RNWC35 XW C35 35A Charge Controller A Controller for Virtually Any DC Charging Source Previous Part #: C-35 Previousy a Xantrex Product The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. C12-12V C35-12V/24V (55 VDC) C40-12V/24V/48V (125 VDC) C60-12V/24V (55 VDC) with Optional CM/R-50 RemoteDisplayforC35,C40,C60,15mcable
Add to cart

Solar Charge Controller Wiser2 Dc12v/24V 15A~50A, 50A

Wiser2 DC12V/24V 15A~50A, 50A Rated current:15A 20A 30A 40A 50A I-P-Wiser series adopted with auto cool, high conversion efficiency, LCD display and free PC software. It features an efficient MPPT control algorithm to track the maximum power point of the PV array in any environment. PV Input 150V
Read more

Homaya Solar Hybrid System 1500

176,760.00
Solar homaya hybrid home system 1500, powers both ac and dc loads from the smart synergy of solar and grid energy, homaya solar hybrid system range is ...
Add to cart

I-panda Smart MPPT Solar Charge Controller

427,996.00
I-P-Smart1-96V Series MPPT SOLAR CHARGE CONTROLLER DC96V 20A~30A SERIES I-Panda MPPT Solar Charge Controller 30A, 300V/96V This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller,making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented, Sealed, Gel, NiCd). 12V/24V/48V/96V system auto recognize for easy control. 12V/24V/48V system maximum solar input is DC 150V ,96V system maximum solar input is DC 300V ;
Add to cart

Himel Breaker DC 16A 2Poles

8,450.00
Himel 16A 2P C 6K DC 500V Miniature Circuit BreakerHDB3WZ2C16
Add to cart