Sunbird off grid bi directional solar inverter 250Kva 600V Online Solar  Hybrid system is the new generation inverter, which has been designed specially for the solar application, made by FujiElectric Consul Neowatt (Japan/Indian Collaboration).

Suitable for mini grid inverter, Medical inverter, datacenter inverter,Residential backup Inverter,Library system Inverter.

SUNBIRD 3000 is Three phase output, industrial grade Inverter system. The Inverter module can operate in parallel with AC input source.

In normal mode, Inverter operates from battery or array power source and produces 3 phase conditioned AC output to cater the load requirement.

 

Suitable for :

  • mini grid inverter
  • Medical inverter
  • datacenter inverter
  • Residential backup Inverter
  • Library system Inverter
  • Petrol & Gas station
  • Factory
  • Water Pumping & Circulation
  • Military and Security application
  • CCTV Camera Backup

MPPT

MPPT Voltage-330-480V

Mppt Maximum Input Current (A)-105A

No. of charge controller-1

Charging Current(Max) from PV in Amp-111A

Grid

3ph

Nominal Voltage & Voltage Range-3Phase 4 Wire / 415VAC(+10%, -15%), 50Hz

Charging Current(Max) from Grid in Amp-55A

Battery

Battery Voltage-240V

Battery Type-SMF/VRLA/Wet Lead Acid/ TGel

Output Waveform-sine wave

Nominal Output Current (A)-415VAC L-L (240VAC L-N) / (Pure Sine Wave)

Overload at nominal output voltage for 10 minutes-125%

Overload at nominal output voltage for 1 minutes-150%

Inverter peak efficiency-Up to 92%

Galvanic Isolation-Inbuilt isolation transformer at inverter output

Special Features

Special Features

Multiple 32 bit DSP controllers Space Vector Modulation Battery less operation

High efficiency

True Bi-directional Solar Inverter

Higher Array voltage capacity optionally available

Inbuilt charge controller

MPPT – Achieved through Incremental Conductance Algorithms

Modular construction gives higher MTTR Battery charging through Grid up to 100% Selectable source feature – Grid / Battery

DC fan for low power consumption

Inbuilt isolation transformer for galvanic isolation 128 x 64 Graphics display

PF correction while on mains / Grid supply (Line interactive) Variable fan speed – for increased reliability, results into

lesser dust suction inside the cabinet

The built in solar charge controller can accommodate up to 11kw of solar panel

MPPT based array charger, supplies the DC power for battery charging as well as for the inverter.

In case batteries are going in to discharge mode due to array unhealthy, Grid input source will get triggered automatically at certain predetermined battery voltage level and operate in parallel with the inverter. Grid Input source starts battery charging as well as takes care of output load and after sufficient battery charge level, it will automatically isolates from the inverter.

Sunbird 3000 Solar inverter has many unparallel features, which gives best ROI for the user and helps in bringing the dream of Green planet more closer. The 30Kva is suitable for medical application and production line  due to 0 switching time.

 

CHASSIS DIMENSION (WXDXH) 600 x 800 x 1200 IP20

Storage -Operating Temperature–20 °C – 70°C

Operating Temperature-Inverter : 0-40 °C,

SMF battery : 25 to 27 Deg C

Weight 1960 kg
Dimensions 1850 × 1200 × 2020 cm

Reviews

There are no reviews yet.

Be the first to review “250Kva 600V Online Hybrid Inverter With Mppt Solar Charge Controller”

Your email address will not be published. Required fields are marked

XW-CONDUIT BOX Schneider Conext

158,649.00
The XW+ Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections.
Add to cart

Rolls AGM Battery 12V 220ah @100HR

305,756.00
Rolls 220ah 12V agm battery , made by Rolls battery engineering , Canada Manufactured in China factory
Add to cart

CM/R-50 Xantrex Remote Display for Solar Charge Controller

55,272.00
Remote Display for C35,C40,C60,15mcable CM/R-50 Xantrex Remote Display For Solar Charge Controller Digital Meter Mounts Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100 ft (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50 ft (15 m) or 100 ft (31 m) communication cable for remote installation.
Add to cart

Mnedc 175A DC Battery Breaker

76,812.00
MNEDC 175A DC Battery Breaker 125VDC Made by Midnite USA MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Compatible with SW4048 MS4338PE VFXR3048E
Add to cart

Schneider Vivace Flush Switch 10A Bell Press with Bell Icon KB31BPB

2,710.00
Main range Vivace product or component type Switch device short name KB31bpb device application Control device presentation Complete mechanism Complementary switch function Bell actuator Rocker number of gangs 1 gang colour tint White material Polycarbonate:...
Add to cart