Sunbird off grid bi directional solar inverter 10Kva 120V is the new generation inverter, which has been designed specially for the solar application.

suitable for :

Medical backup, Residential back, Datacenter backup , mini grid backup, Rural electrification backup and generation .

SUNBIRD 1000 is single phase output, Inverter system. The Inverter module can operate in parallel with AC input source.

In normal mode, Inverter operates from battery or array power source and produces 1 phase conditioned AC output to cater the load requirement.

MPPT Voltage-165V -235V DC

Maximum Input Current (A)-69A

No. of charge controller-1

1ph

Nominal Voltage & Voltage Range-230VAC ,50Hz

Battery Voltage-120V

Output Waveform-sine wave

Nominal Output Current (A)-44A

Overload at nominal output voltage for 10 minutes-125%

Overload at nominal output voltage for 1 minutes-150%

Inverter peak efficiency-Up to 90%

Galvanic Isolation-Inbuilt isolation transformer at inverter output

Special Features

16 bit DSP controllers

High efficiency

True Bi-directional Solar Inverter

Higher Array voltage capacity optionally available Inbuilt MPPT charge controller

 Selectable source feature – Grid / Battery

DC fan for low power consumption

Inbuilt isolation transformer for galvanic isolation

The built in solar charge controller can accommodate up to 11kw of solar panel

MPPT based array charger, supplies the DC power for battery charging as well as for the inverter.

In case batteries are going in to discharge mode due to array unhealthy, Grid input source will get triggered automatically at certain predetermined battery voltage level and operate in parallel with the inverter. Grid Input source starts battery charging as well as takes care of output load and after sufficient battery charge level, it will automatically isolates from the inverter.

Sunbird Solar inverter has many unparallel features, which gives best ROI for the user and helps in bringing the dream of Green planet more closer. The 10Kva is suitable for medical application due to 0 switching time.

 

CHASSIS DIMENSION (WXDXH) 600 x 800 x 1200 IP20

Operating Temperature–20 °C – 70°C

Reviews

There are no reviews yet.

Be the first to review “10Kva 120V Online Hybrid Solar Inverter”

Your email address will not be published. Required fields are marked

Beaver Battery Charger 48V 15Amp

58,880.00

SPECIFICATION

INPUT

Voltage Range:- 165-285VAC Frequency :- 40-70Hz Current:-  8A (Max.) @full load  

OUTPUT

Max. Output Current:- 4A ±     8A±     10A±     12A±     15A±     15A±     20A± 0.4A     0.8A     1A         1.2A       1.5A       1.5A      20A Output Voltage            240V      120V     96V      72V        48V        36V       24V Max. Output Char.     960W     960W  960W    960W   720W    540W    480W  

PHYSICAL

Dimension (DxWxH):- 300x165x95cm Net Weight:                     3.6                                           3.1

ENVIRONMENT

Operating Humidity:-        5-95% RH (non-condensing) Operating Temperature:-   0-40°C Noise Level:- Less than 50db (A) @CC model & full load
Add to cart

Victron Quattro 48/15000/200-100/100 230V VE.Bus Inverter

The Victron Quattro 48/15000 is a powerful inverter with a sine wave, a battery charger, a transfer switch and two independent AC inputs in a compact ...
Read more

CONEXT XW+ POWER DISTBUTION PANEL

985,000.00
The XW+ Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support a code- compliant single-inverter installation.
Add to cart

Luminous Battery

Luminous inverter battery 200ah 12v
Read more

Himel Voltage stabilizer, HSVC, wall-mounted servo motor type, 10 kVA

242,500.00
Add to cart