Sunbird off grid bi directional solar inverter 10Kva 120V is the new generation inverter, which has been designed specially for the solar application.

suitable for :

Medical backup, Residential back, Datacenter backup , mini grid backup, Rural electrification backup and generation .

SUNBIRD 1000 is single phase output, Inverter system. The Inverter module can operate in parallel with AC input source.

In normal mode, Inverter operates from battery or array power source and produces 1 phase conditioned AC output to cater the load requirement.

MPPT Voltage-165V -235V DC

Maximum Input Current (A)-69A

No. of charge controller-1

1ph

Nominal Voltage & Voltage Range-230VAC ,50Hz

Battery Voltage-120V

Output Waveform-sine wave

Nominal Output Current (A)-44A

Overload at nominal output voltage for 10 minutes-125%

Overload at nominal output voltage for 1 minutes-150%

Inverter peak efficiency-Up to 90%

Galvanic Isolation-Inbuilt isolation transformer at inverter output

Special Features

16 bit DSP controllers

High efficiency

True Bi-directional Solar Inverter

Higher Array voltage capacity optionally available Inbuilt MPPT charge controller

 Selectable source feature – Grid / Battery

DC fan for low power consumption

Inbuilt isolation transformer for galvanic isolation

The built in solar charge controller can accommodate up to 11kw of solar panel

MPPT based array charger, supplies the DC power for battery charging as well as for the inverter.

In case batteries are going in to discharge mode due to array unhealthy, Grid input source will get triggered automatically at certain predetermined battery voltage level and operate in parallel with the inverter. Grid Input source starts battery charging as well as takes care of output load and after sufficient battery charge level, it will automatically isolates from the inverter.

Sunbird Solar inverter has many unparallel features, which gives best ROI for the user and helps in bringing the dream of Green planet more closer. The 10Kva is suitable for medical application due to 0 switching time.

 

CHASSIS DIMENSION (WXDXH) 600 x 800 x 1200 IP20

Operating Temperature–20 °C – 70°C

Reviews

There are no reviews yet.

Be the first to review “10Kva 120V Online Hybrid Solar Inverter”

Your email address will not be published. Required fields are marked

30KVA 3ph Voltage Regulator Himel

872,750.00
Himel Voltage Regulator / Stabilizer 30Kva 3ph Servo Motor
Add to cart

Pylontech UP5000

The Pylontech UP5000 lithium battery is a mid-range 48V battery that is ideal for daily cycling applications with a lifetime of over 4,500 cycles at a 95% depth of discharge. This battery also suits larger domestic applications as you can parallel up to 16 units for up to 72.96kWh of high-performance energy storage. This reliable solar storage solution comes with a 7-year warranty. However, its ultra-reliable performance and superior low failure rate mean it should last over 10 years.   Key Features:
  • Modular design for ease of expansion
  • Higher usable capacity resulting in fewer battery modules installed
  • Usable capacity up to 4,560Wh
  • Parallel Capability of up to 16 units
  • Allows for large installation of up to 72.96kWh with no LV Hub
  • Intelligent BMS protecting battery cells
  • 95% DoD with more usable capacity
  • RS485 and CAN compatible
 
Read more

Out of stock

Canadian Solar – CS3L-375MS

212,060.00
Description
CS3L-375MS
Nominal power: 375 W
Celltype: Mono
Number of cells: 120
Module efficiency: 20,27 %
Power Tolerance: n/a
System Voltage: 1500 V
Incl. optimizer: no
Measurements
Length: 1.765 mm
Width: 1.048 mm
Frame thickness: 35 mm
Frame color: silver/white
Weight: 21 kg
Snow load: 5.400 Pa
Wind load: 3.600 Pa
Pieces per pallet: 30
Manufacturer warranty
Product warranty: 12 years
Power warranty: 25 years on 0.55% of nominal power
Certificates IEC 61730 - Safety Qualification
Read more

Solar Charge Controller Wiser2 Dc12v/24V 15A~50A, 50A

Wiser2 DC12V/24V 15A~50A, 50A Rated current:15A 20A 30A 40A 50A I-P-Wiser series adopted with auto cool, high conversion efficiency, LCD display and free PC software. It features an efficient MPPT control algorithm to track the maximum power point of the PV array in any environment. PV Input 150V
Read more

Out of stock

MPPT Solar Charge Controller 96v/60A (SAKO)

MAIN FUNCTION

  1. full Multi-function LCD Display, easier to check
  2. Rich operation information shows that PV voltage, current and cumulative power generation
  3. battery charging voltage are adjustable
  4. parameter settling power-down save function, automatic memory once setup is complete, easy and fast to use
  5. various status indications
  6. with the over-charge, over-load, short circuit and Anti-reverse protection
Read more