Sunbird off grid bi directional solar inverter 100Kva 240V Online Solar  Hybrid system is the new generation inverter, which has been designed specially for the solar application, made by FujiElectric Consul Neowatt (Japan/Indian Collaboration).

Suitable for mini grid inverter, Medical inverter, datacenter inverter,Residential backup Inverter,Library system Inverter.

SUNBIRD 3000 is Three phase output, industrial grade Inverter system. The Inverter module can operate in parallel with AC input source.

In normal mode, Inverter operates from battery or array power source and produces 3 phase conditioned AC output to cater the load requirement.

Suitable for :

  • mini grid inverter
  • Medical inverter
  • datacenter inverter
  • Residential backup Inverter
  • Library system Inverter
  • Petrol & Gas station
  • Factory
  • Water Pumping & Circulation
  • Military and Security application
  • CCTV Camera Backup

MPPT

MPPT Voltage-330-480V

Mppt Maximum Input Current (A)-105A

No. of charge controller-1

Charging Current(Max) from PV in Amp-111A

Grid

3ph

Nominal Voltage & Voltage Range-3Phase 4 Wire / 415VAC(+10%, -15%), 50Hz

Charging Current(Max) from Grid in Amp-55A

Battery

Battery Voltage-240V

Battery Type-SMF/VRLA/Wet Lead Acid/ TGel

Output Waveform-sine wave

Nominal Output Current (A)-415VAC L-L (240VAC L-N) / (Pure Sine Wave)

Overload at nominal output voltage for 10 minutes-125%

Overload at nominal output voltage for 1 minutes-150%

Inverter peak efficiency-Up to 92%

Galvanic Isolation-Inbuilt isolation transformer at inverter output

Special Features

Special Features

Multiple 32 bit DSP controllers Space Vector Modulation Battery less operation

High efficiency

True Bi-directional Solar Inverter

Higher Array voltage capacity optionally available

Inbuilt charge controller

MPPT – Achieved through Incremental Conductance Algorithms

Modular construction gives higher MTTR Battery charging through Grid up to 100% Selectable source feature – Grid / Battery

DC fan for low power consumption

Inbuilt isolation transformer for galvanic isolation 128 x 64 Graphics display

PF correction while on mains / Grid supply (Line interactive) Variable fan speed – for increased reliability, results into

lesser dust suction inside the cabinet

The built in solar charge controller can accommodate up to 11kw of solar panel

MPPT based array charger, supplies the DC power for battery charging as well as for the inverter.

In case batteries are going in to discharge mode due to array unhealthy, Grid input source will get triggered automatically at certain predetermined battery voltage level and operate in parallel with the inverter. Grid Input source starts battery charging as well as takes care of output load and after sufficient battery charge level, it will automatically isolates from the inverter.

Sunbird 3000 Solar inverter has many unparallel features, which gives best ROI for the user and helps in bringing the dream of Green planet more closer. The 30Kva is suitable for medical application and production line  due to 0 switching time.

 

CHASSIS DIMENSION (WXDXH) 600 x 800 x 1200 IP20

Storage -Operating Temperature–20 °C – 70°C

Operating Temperature-Inverter : 0-40 °C,

SMF battery : 25 to 27 Deg C

Weight 1030 kg
Dimensions 1200 × 1100 × 2000 cm

Reviews

There are no reviews yet.

Be the first to review “100Kva 480V Online Hybrid Inverter With Mppt Solar Charge Controller”

Your email address will not be published. Required fields are marked

Morningstar SS-MPPT-15L

Technology : MPPT Norminal Battery Voltage : Selectable -12,24V Maximum Current Output :15amps Maximum Solar array Capacity : @12V=200watts,@24V=400watts, Open Circuit Voltage:75VDC Status Display:LED With PV Lighting option Weight:0.6KG
Read more

Schneider Conext SCP: Solar System Control Panel

359,699.00
Schneider Conext SCP: Solar System Control Panel 865-1050-01
Weight 0.9 kg
Dimensions 9.0 × 11.0 × 3.0 in
    The XW+/SW SCP is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System. Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor • Multiple SCP can be used on the same Xanbus network • Compatible with Conext ComBox
Add to cart

Schneider Conext Solar Charge Controller 60A- 150Vdc

921,990.00
Mechanical Data Technology: Maximum Power Point Tracking (MPPT) Dimensions: 14.50 x 5.75 x 5.50 inches Weight: 10.75 lbs Enclosure Type: Ventilated Enclosure Material: Sheet Metal Chassis Device Mounting: Vertical Wall Mount - Indoor Only Cable Entry: 7/8" and 1" Knock-Outs & Aluminum Heat-Sink Recommended Wire Size: #6 AWG to #14 AWG Total Power Consumption: 2.5W (Tare) Charger Regulation Method: Three-Stage (Bulk, Absorption, Float)/Two-Stage (Bulk, Absorption) Operating Temperature Range: -20 to +45°C
Add to cart

Schneider Conext™ Battery Fuse Combiner Box

223,437.00
Schneider Electric Conext™ Battery Fuse Combiner Box 250 The Conext™ Battery Fuse Combiner Box 250 combines up to three Conext XW or XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides fuse protection for cables, batteries, and inverter/chargers.
Add to cart

Schneider Vivace Switched Socket with Neon 15A 1way 1gang KB15_15N

5,327.00
Main range Vivace product or component type Switched socket device short name KB15 device presentation Complete product Complementary pilot light Red neon indicator outlet poles configuration 1P + E number of gangs 1 gang Colour...
Add to cart

I-panda Smart MPPT Solar Charge Controller

427,996.00
I-P-Smart1-96V Series MPPT SOLAR CHARGE CONTROLLER DC96V 20A~30A SERIES I-Panda MPPT Solar Charge Controller 30A, 300V/96V This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller,making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented, Sealed, Gel, NiCd). 12V/24V/48V/96V system auto recognize for easy control. 12V/24V/48V system maximum solar input is DC 150V ,96V system maximum solar input is DC 300V ;
Add to cart